How to service the evaporator core on 2008 Lincoln Mark LT?

The first step for servicing the evaporator core involves performing a vacuum leak test on it before removal. The first step involves removing the heater core followed by detachment of the wire harness from the evaporator core cover through screw decycling. The service requires removal of blower motor resistors used for electronic manual temperature control and electronic automatic temperature control. Next, proceed to remove the screws from the bottom evaporator core cover followed by disconnecting the air inlet mode door actuator electrical connector. Pearce the leftovers screws from the upper evaporator core cover then detach the evaporator core cover. Finally, extract the evaporator core. The installation process requires the opposite order of removing steps alongside proper application of clean PAG oil to the refrigerant system.

OEM 2008 Lincoln Mark LT Evaporator

A/C Evaporator Core

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Evaporators found

View related parts
2008 Lincoln Mark LT Evaporator Core, Front
Part Number: 7L3Z-19860-B
$160.05 MSRP: $263.35
You Save: $103.30 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Core - Air Conditioning Evaporator; A/C Evaporator Core, Front; A/C Evaporator Core Repair Kit; A/C Evaporator Core; A/C Evaporator; Evaporator
- Manufacturer Note: Includes Seal
- Position: Front
- Replaces: 7L3Z-19860-A
- Base No.: 19860
- Item Weight: 6.00 Pounds
- Item Dimensions: 13.2 x 8.5 x 16.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L3Z-19860-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Lincoln Mark LT Submodels:
- Base | 8 Cyl 5.4 L GAS
View related parts
2008 Lincoln Mark LT Evaporator Assembly
Part Number: 6L3Z-19B555-KA
Product Specifications
- Other Name: Evaporator And Housing Assembly; A/C Evaporator Core and Case Assembly; A/C Evaporator Core Repair Kit; A/C Evaporator
- Manufacturer Note: Includes Temperature Blend Doors
- Replaces: 4L3Z-19B555-KA
- Base No.: 19B555
- Item Weight: 17.60 Pounds
- Item Dimensions: 46.9 x 21.0 x 20.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L3Z-19B555-KA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Lincoln Mark LT Submodels:
- Base | 8 Cyl 5.4 L GAS
View related parts
2008 Lincoln Mark LT Evaporator Assembly
Part Number: 6L3Z-19B555-JA
Product Specifications
- Other Name: Evaporator And Housing; A/C Evaporator Core and Case Assembly; A/C Evaporator Core Repair Kit; Evaporator And Housing Assembly; A/C Evaporator
- Manufacturer Note: Includes Temperature Blend Doors
- Base No.: 19B555
- Item Weight: 15.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L3Z-19B555-JA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Lincoln Mark LT Submodels:
- Base | 8 Cyl 5.4 L GAS

2008 Lincoln Mark LT Evaporator

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Lincoln Mark LT Evaporator available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Lincoln Mark LT Evaporator as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Lincoln Mark LT Evaporator Parts Questions & Experts Answers

Q: How to service the evaporator core on 2008 Lincoln Mark LT?
A: The first step for servicing the evaporator core involves performing a vacuum leak test on it before removal. The first step involves removing the heater core followed by detachment of the wire harness from the evaporator core cover through screw decycling. The service requires removal of blower motor resistors used for electronic manual temperature control and electronic automatic temperature control. Next, proceed to remove the screws from the bottom evaporator core cover followed by disconnecting the air inlet mode door actuator electrical connector. Pearce the leftovers screws from the upper evaporator core cover then detach the evaporator core cover. Finally, extract the evaporator core. The installation process requires the opposite order of removing steps alongside proper application of clean PAG oil to the refrigerant system.