FordParts
My Garage
My Account
Cart
OEM 2008 Lincoln MKX Window Regulator
Electric Power Window Regulator- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Window Regulators found
2008 Lincoln MKX Window Regulator, Front Passenger Side Part Number: 7T4Z-7823200-A
$67.28 MSRP: $110.71You Save: $43.43 (40%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Regulator - Window - Less Motor; Window Regulator, Front Right
- Manufacturer Note: Includes Attaching Hardware
- Position: Front Passenger Side
- Base No.: <23200
- Item Weight: 4.30 Pounds
- Item Dimensions: 24.7 x 21.4 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7T4Z-7823200-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Lincoln MKX Window Regulator, Rear Driver Side Part Number: 7T4Z-7827001-A
$66.16 MSRP: $108.85You Save: $42.69 (40%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Regulator - Window - Less Motor; Window Regulator, Rear Left
- Position: Rear Driver Side
- Base No.: <27000
- Item Weight: 2.50 Pounds
- Item Dimensions: 25.9 x 4.5 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7T4Z-7827001-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Lincoln MKX Window Regulator, Rear Passenger Side Part Number: 7T4Z-7827000-A
$65.26 MSRP: $107.38You Save: $42.12 (40%)Product Specifications- Other Name: Regulator - Window - Less Motor; Window Regulator, Rear Right
- Position: Rear Passenger Side
- Base No.: <27000
- Item Weight: 2.70 Pounds
- Item Dimensions: 25.9 x 4.5 x 7.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7T4Z-7827000-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Lincoln MKX Window Regulator, Front Driver Side Part Number: 7T4Z-7823201-A
$73.37 MSRP: $120.73You Save: $47.36 (40%)Product Specifications- Other Name: Regulator - Window - Less Motor; Window Regulator, Front Left
- Manufacturer Note: Includes Attaching Hardware
- Position: Front Driver Side
- Base No.: <23200
- Item Weight: 4.10 Pounds
- Item Dimensions: 24.9 x 4.5 x 21.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7T4Z-7823201-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Lincoln MKX Window Regulator
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Lincoln MKX Window Regulator available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Lincoln MKX Window Regulator as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2008 Lincoln MKX Window Regulator Parts Q&A
- Q: How to service the rear door window regulator and motor on 2008 Lincoln MKX?A: The service of rear door window components begins with taking out the speaker unit from the door. Before cutting the window regulator cable it is important to support the window glass unless you plan to install a new window regulator assembly. Chose the window control switch as the first test to confirm that the window operates. After unplugging the access there you should lower the window glass and tape it in place before removing the glass clamp bolt. The regulator needs support before loosening the glass clamp bolt. When reinstalling tighten it to 9 Nm (80 lb-in). The technician should lower the regulator to its bottom position on the track stops before disconnecting the electrical slot at the B-pillar. Use the speaker hole for access to release the clip attaching the harness to your door by removing its two securing bolts from the electrical harness grommet. Guided by the weather strip you can unclip and insert the wiring harness into the opening between door weather strip and door. The three door latch screws need removal followed by tightening them to 9 lb-ft during reinstallation. Take out the access plug from the door latch side followed by unscrewing the outside door handle reinforcement screw then the handle itself. The screw should be secured to 8 Nm (71 lb-in) when reinstalling it. When installing the module rear door remove first the keypad from the door followed by removal of nine door module bolts after which you can take out the module moving its components then readjust the bolts to 9 Nm (80 lb-in) torque specification. You should perform the installation by reversing the removal steps.