FordParts
My Garage
My Account
Cart
OEM 2008 Lincoln MKZ A/C Expansion Valve
Air Conditioning Expansion Valve- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 A/C Expansion Valve found
2008 Lincoln MKZ Expansion Valve Part Number: 6E5Z-19849-AA
Product Specifications- Other Name: Valve Assembly - Evaporator Expansion; A/C Expansion Valve
- Manufacturer Note: includes o-ring
- Base No.: 19849
- Item Weight: 0.70 Pounds
- Item Dimensions: 3.9 x 2.3 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6E5Z-19849-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Lincoln MKZ A/C Expansion Valve
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Lincoln MKZ A/C Expansion Valve available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Lincoln MKZ A/C Expansion Valve as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2008 Lincoln MKZ A/C Expansion Valve Parts Q&A
- Q: How to Service the A/C Expansion Valve on 2008 Lincoln MKZ?A: The service process for the thermostatic expansion valve starts by recovering all refrigerant present. Disconnection of the A/C pressure transducer electrical connector begins the removal process followed by detachment of the wire harness from the TXV stud. Disconnect the TXV fitting by removing its fitted nut with new gasket seals then discard the old ones. Always follow the installation procedure by tightening the fitting up to 15 Nm (11 lb-ft). The two TXV bolts need to be removed before pulling out the TXV equipment while disposing of its gasket seals. The installation process for the new TXV requires following the opposite steps of removal while using new gasket seals and requiring correct clean PAG oil for lubricating the refrigerant system. Evacuation must follow leak testing then the refrigerant system needs charging.