My Garage
Cart

OEM 2008 Lincoln MKZ Power Window Motor

Window Lift Motor
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Power Window Motors found

  • 2008 Lincoln MKZ Power Window Motor Diagram - 6E5Z-5423394-BA
    View related parts
    Product Specifications
    • Other Name: Motor Assembly - Window Operating; Power Window Motor, Rear Right; Power Window Motor
    • Position: Rear Passenger Side
    • Base No.: <23394
    • Item Weight: 2.10 Pounds
    • Item Dimensions: 7.4 x 4.7 x 4.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 6E5Z-5423394-BA
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2008 Lincoln MKZ Submodels:
    • Base, Hybrid | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
  • 2008 Lincoln MKZ Power Window Motor - 6E5Z-5423395-BA
    2008 Lincoln MKZ Power Window Motor Diagram - 6E5Z-5423395-BA
    View related parts
    Product Specifications
    • Other Name: Motor Assembly - Window Operating; Power Window Motor, Rear Left; Power Window Motor
    • Position: Rear Driver Side
    • Base No.: <23394
    • Item Weight: 1.40 Pounds
    • Item Dimensions: 7.5 x 4.7 x 4.3 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 6E5Z-5423395-BA
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2008 Lincoln MKZ Submodels:
    • Base, Hybrid | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
  • 2008 Lincoln MKZ Power Window Motor - 6H6Z-5423395-AA
    2008 Lincoln MKZ Power Window Motor Diagram - 6H6Z-5423395-AA
    View related parts
    Product Specifications
    • Other Name: Motor Assembly - Window Operating; Power Window Motor
    • Position: Driver Side
    • Base No.: <23394
    • Item Weight: 1.70 Pounds
    • Item Dimensions: 6.7 x 3.8 x 6.8 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 6H6Z-5423395-AA
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2008 Lincoln MKZ Submodels:
    • Base | 6 Cyl 3.5 L GAS
  • 2008 Lincoln MKZ Power Window Motor - 6H6Z-5423394-AA
    2008 Lincoln MKZ Power Window Motor Diagram - 6H6Z-5423394-AA
    View related parts
    Product Specifications
    • Other Name: Motor Assembly - Window Operating; Power Window Motor
    • Position: Passenger Side
    • Base No.: <23394
    • Item Weight: 1.60 Pounds
    • Item Dimensions: 8.2 x 5.2 x 2.7 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 6H6Z-5423394-AA
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2008 Lincoln MKZ Submodels:
    • Base | 6 Cyl 3.5 L GAS

2008 Lincoln MKZ Power Window Motor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Lincoln MKZ Power Window Motor available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Lincoln MKZ Power Window Motor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Lincoln MKZ Power Window Motor Parts Q&A

  • Q: How to service the rear door Power Window Motor on 2008 Lincoln MKZ?
    A: The process of servicing the rear door window motor starts with taking out the rear door trim panel and the access hole plugs. Hammer the motorless door window unit to a reachable position next to the access holes. Then loosen the glass clamp bolts using a preventative measure to tighten them to 6 Nm (53 lb-in) following reinstallation. The window should be taped into position before lowering the window regulator to stop at the tracks' lower points. The door speaker must be uninstalled followed by removal of the interior door handle screw which requires setting the door handle aside. To start the window installation process workers must first disconnect the wiring harness retainers before taking off the wiring harness cover plate and disconnecting the two door latch cable retainers. When reinstalling the bolts remove the ten bolts from the door module and fasten them to a torque of 11 Nm (8 lb-ft). Remove the rear door module assembly by disconnecting its electrical connector followed by the transferring of essential components if replacing it with a new module. The reverse sequence should be performed to finish installing the system.