FordParts
My Garage
My Account
Cart
OEM 2008 Lincoln MKZ Sway Bar Link
Stabilizer Sway Bar Link- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Sway Bar Links found
2008 Lincoln MKZ Stabilizer Link, Front Driver Side Part Number: 3M8Z-5K483-L
$38.24 MSRP: $60.73You Save: $22.49 (38%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Link; Suspension Stabilizer Bar Link, Front Left; Sway Bar Link Kit
- Position: Front Driver Side
- Base No.: 5K483
- Item Weight: 0.80 Pounds
- Item Dimensions: 20.1 x 6.2 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3M8Z-5K483-L
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Lincoln MKZ Stabilizer Link, Front Passenger Side Part Number: 3M8Z-5K483-R
$32.63 MSRP: $51.82You Save: $19.19 (38%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Link; Front Right Suspension Stabilizer Bar Link Kit; Sway Bar Link
- Position: Front Passenger Side
- Base No.: 5K483
- Item Weight: 0.80 Pounds
- Item Dimensions: 19.4 x 6.3 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3M8Z-5K483-R
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Lincoln MKZ Sway Bar Link
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Lincoln MKZ Sway Bar Link available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Lincoln MKZ Sway Bar Link as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2008 Lincoln MKZ Sway Bar Link Parts Q&A
- Q: How to Service and Repair the Front Sway Bar Link on 2008 Lincoln MKZ?A: Commence sway bar link service and repair work by taking out the wheel and tire from the vehicle. The hex holding feature must be used to stop the ball stud from rotating when working on sway bar link nuts. Start by taking out the upper nut that secures the sway bar link followed by new part installation while tightening it to 40 Nm (30 lb-ft). Begin by preventing the ball stud rotation with the hex holding feature to remove the lower sway bar link nut before discarding it and then moving to stabilize the bar link. The torque specification for the new sway bar link lower nut should be set at 42 Nm (31 lb-ft). Perform the final steps to install by executing the opposite sequence of the removal steps. New replacement parts must use identical numbers from the original model or parts with equivalent specifications while keeping within the recommended torque specifications for maintaining suspension system integrity.