FordParts
My Garage
My Account
Cart
OEM 2007 Lincoln MKZ Sway Bar Link
Stabilizer Sway Bar Link- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Sway Bar Links found
2007 Lincoln MKZ Stabilizer Link, Front Driver Side Part Number: 3M8Z-5K483-L
$38.24 MSRP: $60.73You Save: $22.49 (38%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Link; Suspension Stabilizer Bar Link, Front Left; Sway Bar Link Kit
- Position: Front Driver Side
- Base No.: 5K483
- Item Weight: 0.80 Pounds
- Item Dimensions: 20.1 x 6.2 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3M8Z-5K483-L
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Lincoln MKZ Stabilizer Link, Front Passenger Side Part Number: 3M8Z-5K483-R
$32.63 MSRP: $51.82You Save: $19.19 (38%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Link; Front Right Suspension Stabilizer Bar Link Kit; Sway Bar Link
- Position: Front Passenger Side
- Base No.: 5K483
- Item Weight: 0.80 Pounds
- Item Dimensions: 19.4 x 6.3 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3M8Z-5K483-R
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Lincoln MKZ Sway Bar Link
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Lincoln MKZ Sway Bar Link available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Lincoln MKZ Sway Bar Link as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2007 Lincoln MKZ Sway Bar Link Parts Q&A
- Q: How to service and repair the front sway bar link on 2007 Lincoln MKZ?A: A professional repair of the front sway bar link starts with setting the vehicle into neutral gear followed by hoisting it up. Suspension fasteners require using new parts that match their original part number because they directly affect important system performance so inferior or alternative parts may generate major service costs. You should activate the holding feature of the sway bar link to stop the ball stud rotation before you discard both the upper and lower nuts. The upper nut of the sway bar link requires tightening to 40 Nm (30 ft. lbs.) after installation. The holding feature will allow you to stop the ball stud from rotating during removal of the lower sway bar link nut and sway bar link. You should tighten the lower nut to 42 Nm when installing the sway bar link (31 ft. lbs.). Complete the installation by performing the reverse steps of removal.