FordParts
My Garage
My Account
Cart
OEM 2008 Lincoln Navigator Automatic Transmission Filter
AT Filter- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Automatic Transmission Filter found
2008 Lincoln Navigator Filter Part Number: 7L7Z-7A098-A
$109.20 MSRP: $151.06You Save: $41.86 (28%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Screen Assembly; Transmission Filter; Screen
- Base No.: 7A098
- Item Weight: 1.40 Pounds
- Item Dimensions: 10.1 x 4.4 x 9.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L7Z-7A098-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Lincoln Navigator Automatic Transmission Filter
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Lincoln Navigator Automatic Transmission Filter available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Lincoln Navigator Automatic Transmission Filter as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2008 Lincoln Navigator Automatic Transmission Filter Parts Q&A
- Q: How to Maintain and Replace the Automatic Transmission Filter in a 2008 Lincoln Navigator?A: Begin service and repair of the automatic transmission fluid filter by first using neutral gear and hoisting the vehicle above ground. It is important to remove the fluid fill plug fluid level indicator assembly on the passenger side front of the transmission case because this allows vacuum release for easier fluid pan removal. The service begins with draining transmission fluid from the pan before removing both the fluid pan gasket and transmission fluid filter. The transmission fluid pan together with its magnet should receive professional cleaning then inspection work. The transmission fluid filter along with its seal assembly should get replaced when the transmission needed repair due to contamination although the filter may stay reused without excessive contamination detected. If a fluid filter seal exists inside the transmission case you should remove it with caution but avoid harming the case. Before installing the new transmission fluid filter apply lubricating automatic transmission fluid on the new seal. Reinstall the magnet into the fluid pan while putting on a new gasket when the previous one is damaged but feel free to reuse a sound gasket. The last step includes fluid pan installation by using a crisscross bolt-tightening method to achieve a 14 Nm (10 lb-ft) torque before completing the transmission fluid refill as specified.