How to Service the Crankshaft Position Sensor on 2008 Lincoln Navigator?

Service of the crankshaft position (CKP) sensor must begin after properly securing the vehicle in neutral position on a hoist. The first step requires removing the accessory drive belt then disconnecting the A/C compressor electrical connector. You should take the A/C compressor aside after removing its three retaining bolts. Proceed with disconnecting the CKP sensor electrical connector then extract the bolt that anchors the CKP sensor. Before placing the CKP sensor install it with 10 Nm (89 lb-in) torque while applying clean engine oil to lubricate the O-ring seal. Refit the A/C compressor by screwing its bolts to 25 Nm (18 lb-ft) torque while finishing up the procedure by following the reverse order of the removal process.

OEM 2008 Lincoln Navigator Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Crankshaft Position Sensor found

View related parts
2008 Lincoln Navigator Crankshaft Position Sensor
Part Number: 1W7Z-6C315-AB
$41.11 MSRP: $65.27
You Save: $24.16 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor - Crankshaft Position; Engine Crankshaft Position Sensor; Crankshaft Sensor; Position Sensor; Sensor - Crankshaft Position - Cps
- Manufacturer Note: Sensor asy. (Crankshaft position) #1W7E 6C315-AA
- Replaces: 1W7Z-6C315-AA
- Base No.: 6C315
- Item Weight: 0.30 Pounds
- Item Dimensions: 8.1 x 6.2 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1W7Z-6C315-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Lincoln Navigator Submodels:
- Base, L, L Luxury, L Reserve, L Select, L Ultimate, Luxury, Reserve, Select, Ultimate | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS

2008 Lincoln Navigator Crankshaft Position Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Lincoln Navigator Crankshaft Position Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Lincoln Navigator Crankshaft Position Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Lincoln Navigator Crankshaft Position Sensor Parts Questions & Experts Answers

Q: How to Service the Crankshaft Position Sensor on 2008 Lincoln Navigator?
A: Service of the crankshaft position (CKP) sensor must begin after properly securing the vehicle in neutral position on a hoist. The first step requires removing the accessory drive belt then disconnecting the A/C compressor electrical connector. You should take the A/C compressor aside after removing its three retaining bolts. Proceed with disconnecting the CKP sensor electrical connector then extract the bolt that anchors the CKP sensor. Before placing the CKP sensor install it with 10 Nm (89 lb-in) torque while applying clean engine oil to lubricate the O-ring seal. Refit the A/C compressor by screwing its bolts to 25 Nm (18 lb-ft) torque while finishing up the procedure by following the reverse order of the removal process.