My Garage
Cart

OEM 2008 Lincoln Town Car Dimmer Switch

Light Dimmer Switch
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Dimmer Switch found

  • 2008 Lincoln Town Car Dimmer Switch - 3W1Z-11691-AA
    2008 Lincoln Town Car Dimmer Switch Diagram - 3W1Z-11691-AA
    View related parts
    Product Specifications
    • Other Name: Resistor Assembly; Headlight Dimmer Switch; Instrument Light Rheostat
    • Manufacturer Note: Thumbwheel design
    • Base No.: 11691
    • Item Weight: 0.30 Pounds
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 3W1Z-11691-AA
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2008 Lincoln Town Car Submodels:
    • Cartier, Cartier L, Designer Series, Executive, Executive L, Executive Protection Series, Protection Series, Signature, Signature L, Signature Limited, Ultimate, Ultimate L | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS

2008 Lincoln Town Car Dimmer Switch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Lincoln Town Car Dimmer Switch available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Lincoln Town Car Dimmer Switch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Lincoln Town Car Dimmer Switch Parts Questions & Experts Answers

  • Q: How to service and repair the headlamp dimmer switch on 2008 Lincoln Town Car?
    A: One must start repairs on the headlamp dimmer switch by taking out the steering column tilt release lever/handle. The upper steering column shroud requires opening using sides pressure before removing the three screws which secure both the upper and lower shrouds. Reinstall these screws to 2 Nm (18 lb-in). The multi-function switch requires removing its two screws prior to disconnection of its three electrical connectors and subsequent reinstallation should tighten these screws to 3 Nm (27 lb-in). The installation process ends with performing the opposite actions of removal steps.

Related 2008 Lincoln Town Car Parts