How to service and repair the front sway bar link on 2008 Lincoln Town Car?

Begin servicing or repairing the front sway bar link after removing the wheel together with its tire. The brake hose requires protection from hanging caliper and anchor plate assembly fragments, so support it with mechanic's wire after removing the bolts. Place the caliper and pads and anchor plate in the right position before installing them with a torque of 160 Nm (118 lb-ft). Next, remove the brake disc. Keep the hex-holding feature during upper sway bar link nut removal because you will need to discard the nut afterward and torque the new nut to 63 Nm (46 lb-ft). The process should be repeated for the lower sway bar link nut with removal of the old one while installing the sway bar link at 55 Nm (41 lb-ft). The installation process must be finished by performing the reverse steps of the removal procedure. The suspension system integrity can be maintained through installation of new parts with identical part numbers or equivalent while respecting specified torque values.

OEM 2008 Lincoln Town Car Sway Bar Link

Stabilizer Sway Bar Link

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Sway Bar Links found

View related parts
2008 Lincoln Town Car Stabilizer Link, Rear
Part Number: 6W1Z-5664-AA
$3.14 MSRP: $4.46
You Save: $1.32 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link, Rear; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Link Kit; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Position: Rear
- Replaces: F1VY-5664-A
- Base No.: 5664
- Item Weight: 0.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 6W1Z-5664-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Lincoln Town Car Submodels:
- Cartier, Cartier L, Designer Series, Executive, Executive L, Executive Protection Series, Protection Series, Signature, Signature L, Signature Limited, Ultimate, Ultimate L | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
2008 Lincoln Town Car Stabilizer Link, Front
Part Number: 6W1Z-5K484-AA
$61.66 MSRP: $101.45
You Save: $39.79 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link; Front Suspension Stabilizer Bar Link Kit; Sway Bar Link; Link Kit
- Manufacturer Note: FROM 08/03/05
- Position: Front
- Replaces: 5W1Z-5K484-A
- Base No.: 5K484
- Item Weight: 0.90 Pounds
- Item Dimensions: 2.9 x 1.8 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 6W1Z-5K484-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Lincoln Town Car Submodels:
- Cartier, Cartier L, Designer Series, Executive, Executive L, Executive Protection Series, Protection Series, Signature, Signature L, Signature Limited, Ultimate, Ultimate L | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS

2008 Lincoln Town Car Sway Bar Link

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Lincoln Town Car Sway Bar Link available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Lincoln Town Car Sway Bar Link as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Lincoln Town Car Sway Bar Link Parts Questions & Experts Answers

Q: How to service and repair the front sway bar link on 2008 Lincoln Town Car?
A: Begin servicing or repairing the front sway bar link after removing the wheel together with its tire. The brake hose requires protection from hanging caliper and anchor plate assembly fragments, so support it with mechanic's wire after removing the bolts. Place the caliper and pads and anchor plate in the right position before installing them with a torque of 160 Nm (118 lb-ft). Next, remove the brake disc. Keep the hex-holding feature during upper sway bar link nut removal because you will need to discard the nut afterward and torque the new nut to 63 Nm (46 lb-ft). The process should be repeated for the lower sway bar link nut with removal of the old one while installing the sway bar link at 55 Nm (41 lb-ft). The installation process must be finished by performing the reverse steps of the removal procedure. The suspension system integrity can be maintained through installation of new parts with identical part numbers or equivalent while respecting specified torque values.