FordParts
My Garage
My Account
Cart
OEM 2008 Mercury Mariner Brake Disc
Disc Rotor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Brake Discs found
2008 Mercury Mariner Rotor, Front Part Number: 5U2Z-1V125-AB
$70.38 MSRP: $108.32You Save: $37.94 (36%)Product Specifications- Other Name: Rotor Assembly; Disc Brake Rotor, Front; Brake Rotor
- Position: Front
- Replaced by: 5U2Z-1V125-AC
- Base No.: 1125
- Item Weight: 19.80 Pounds
- Item Dimensions: 2.8 x 13.8 x 13.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5U2Z-1V125-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Mercury Mariner Rotor Part Number: 5U2Z-1V125-Z
$70.38 MSRP: $108.32You Save: $37.94 (36%)Ships in 1 Business DayProduct Specifications- Other Name: Rotor Assembly
- Replaces: 5L8Z-2C026-AA, 5L8Z-2C026-BA, BRR-132, 5U2Z-1V125-P, BRRF-68
- Base No.: 2C026
- Item Weight: 15.30 Pounds
- Item Dimensions: 3.1 x 13.6 x 13.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5U2Z-1V125-Z
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Mercury Mariner Rotor, Front Part Number: 2U2Z-1V125-GB
$70.38 MSRP: $108.32You Save: $37.94 (36%)Ships in 1 Business DayProduct Specifications- Other Name: Rotor Assembly; Disc Brake Rotor, Front; Disc Brake Rotor; Brake Rotor
- Position: Front
- Replaced by: 2U2Z-1V125-C
- Base No.: 1125
- Item Weight: 15.20 Pounds
- Item Dimensions: 2.8 x 12.9 x 12.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2U2Z-1V125-GB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Mercury Mariner Brake Disc
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Mercury Mariner Brake Disc available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Mercury Mariner Brake Disc as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2008 Mercury Mariner Brake Disc Parts Q&A
- Q: How to remove and replace the rear brake disc on 2008 Mercury Mariner?A: A driver should begin by taking off the wheel and tire before starting the process of replacing the rear brake disc. Before working disconnect the battery and remove fuse 24 (50A) and 31 (50A) from the battery junction box to stop the accumulator from charging and preventing brake system pressurization. Maintain control of the brake pad assembly and caliper when they suspend from the brake hose in order to prevent any damage. You should disconnect the two brake caliper guide pin bolts before positioning the caliper and brake pad assembly to one side supported by mechanic's wire. The caliper bolts must get torqued to 35 Nm (26 lb-ft) during reinstallation. Next, remove the brake disc. The process requires removal of the adjustment hole access plug to retract the parking brake shoes by rotating the adjuster when the brake disc binds with the parking brake shoes. Perform the opposite sequence of removal steps to finish the installation before checking the parking brake shoe adjustment.