FordParts
My Garage
My Account
Cart
OEM 2008 Mercury Milan Ignition Coil
Ignition Coil Resistor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Ignition Coils found
2008 Mercury Milan Ignition Coil Part Number: 6E5Z-12029-BA
$79.34 MSRP: $130.55You Save: $51.21 (40%)Ships in 1 Business DayProduct Specifications- Other Name: Coil Assembly - Ignition; Direct Ignition Coil; Direct Ignition Coil Oe Quality; Coil On Plug Coil
- Base No.: 12029
- Item Weight: 0.70 Pounds
- Item Dimensions: 8.4 x 7.7 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 6
- SKU: 6E5Z-12029-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Mercury Milan Ignition Coil Part Number: 6E5Z-12029-AA
$74.52 MSRP: $101.40You Save: $26.88 (27%)Product Specifications- Other Name: Coil Assembly - Ignition; Direct Ignition Coil; Direct Ignition Coil Oe Quality
- Base No.: 12029
- Item Weight: 0.70 Pounds
- Item Dimensions: 8.4 x 7.9 x 8.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 4
- SKU: 6E5Z-12029-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Mercury Milan Ignition Coil
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Mercury Milan Ignition Coil available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Mercury Milan Ignition Coil as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2008 Mercury Milan Ignition Coil Parts Q&A
- Q: How to Properly Maintain an Ignition Coil and Is It Necessary for a 2008 Mercury Milan?A: You should start servicing the ignition coil-on-plug by taking away all the two nuts and bolt and generator air inlet duct while making sure to tighten these components to 6 Nm (53 lb-in) when reinstalling them. The service procedure starts with disconnecting the four electrical connectors which attach to the ignition coil-on-plug. A twisting motion will help break the seal on ignition coil-on-plugs before removing the four bolts which also take out the ignition coil-on-plugs and require 10 Nm (89 lb-in) torque during installation. Before installing the ignition coil-on-plug boots on the spark plugs you should apply a tiny drop of dielectric grease inside the boots.