How to service and repair the rear brake caliper on 2008 Mercury Sable?

You should start the caliper rear brake service and repair work by taking off the brake pads and disconnecting the parking brake cable from subframe bracket and caliper before setting the cable to the side. The disc brake caliper needs inspection after cleaning to determine whether its replacement with a new one should be performed if leaking or damaged boots are found. After disconnecting the brake flexible hose fitting it is crucial to torque the fitting to 17 Nm (13 lb-ft) during reinstallation. The brake caliper along with brake flexible hose needs to be taken off together which requires removing the retainer clip from the hose. After reversing the removal steps you must finish the installation of the caliper by performing a bleeding procedure. Clean brake fluid of correct manufacturer-grade needs to be used along with preventing contact between previously drained fluid because it poses risks of contamination and cause harm. The brake fluid harms painted surfaces and plastic materials so immediately spray off the spill with water. Do not let brake fluid touch the back adhesive of brake pads since this contact could weaken the caliper pad connection thus requiring you to replace the brake pads. The specified brake parts cleaner is the only acceptable solution because any residue might damage adhesion quality.

OEM 2008 Mercury Sable Brake Caliper

Caliper

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Brake Calipers found

View related parts
2008 Mercury Sable Caliper, Front Driver Side
Part Number: 5F9Z-2B121-BA
$85.58 MSRP: $118.39
You Save: $32.81 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly - Brake - Less Pad; Disc Brake Caliper, Front Left; Brake Caliper Repair Kit; Caliper Assembly - Brake - Less Pads; Brake Caliper
- Manufacturer Note: Warranty Eligible
- Position: Front Driver Side
- Base No.: 2B120
- Item Weight: 6.30 Pounds
- Item Dimensions: 4.8 x 7.2 x 9.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5F9Z-2B121-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Mercury Sable Submodels:
- Base, Premier | 6 Cyl 3.5 L GAS
View related parts
2008 Mercury Sable Caliper, Front Passenger Side
Part Number: 5F9Z-2B120-BA
$85.58 MSRP: $118.39
You Save: $32.81 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly - Brake - Less Pad; Disc Brake Caliper, Front Right; Brake Caliper Repair Kit; Caliper Assembly - Brake - Less Pads; Brake Caliper
- Manufacturer Note: Warranty Eligible
- Position: Front Passenger Side
- Base No.: 2B120
- Item Weight: 6.60 Pounds
- Item Dimensions: 5.0 x 7.4 x 10.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5F9Z-2B120-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Mercury Sable Submodels:
- Base, Premier | 6 Cyl 3.5 L GAS
View related parts
2008 Mercury Sable Caliper, Rear Passenger Side
Part Number: 8G1Z-2552-A
Product Specifications
- Other Name: Caliper Assembly - Brake; Disc Brake Caliper, Rear Right; Brake Caliper Repair Kit; Caliper Assembly - Brake - Less Pads; Brake Caliper
- Manufacturer Note: Warranty Eligible
- Position: Rear Passenger Side
- Replaced by: 6F9Z-2552-A
- Base No.: 2552
- Item Weight: 6.00 Pounds
- Item Dimensions: 7.7 x 7.2 x 4.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8G1Z-2552-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Mercury Sable Submodels:
- Base, Premier | 6 Cyl 3.5 L GAS
View related parts
2008 Mercury Sable Caliper, Rear Driver Side
Part Number: 8G1Z-2553-A
Product Specifications
- Other Name: Caliper Assembly - Brake; Disc Brake Caliper, Rear Left; Brake Caliper Repair Kit; Caliper Assembly - Brake - Less Pads; Brake Caliper
- Manufacturer Note: Warranty Eligible
- Position: Rear Driver Side
- Replaced by: 6F9Z-2553-A
- Base No.: 2552
- Item Weight: 6.00 Pounds
- Item Dimensions: 7.5 x 4.7 x 7.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8G1Z-2553-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Mercury Sable Submodels:
- Base, Premier | 6 Cyl 3.5 L GAS

2008 Mercury Sable Brake Caliper

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Mercury Sable Brake Caliper available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Mercury Sable Brake Caliper as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Mercury Sable Brake Caliper Parts Questions & Experts Answers

Q: How to service and repair the rear brake caliper on 2008 Mercury Sable?
A: You should start the caliper rear brake service and repair work by taking off the brake pads and disconnecting the parking brake cable from subframe bracket and caliper before setting the cable to the side. The disc brake caliper needs inspection after cleaning to determine whether its replacement with a new one should be performed if leaking or damaged boots are found. After disconnecting the brake flexible hose fitting it is crucial to torque the fitting to 17 Nm (13 lb-ft) during reinstallation. The brake caliper along with brake flexible hose needs to be taken off together which requires removing the retainer clip from the hose. After reversing the removal steps you must finish the installation of the caliper by performing a bleeding procedure. Clean brake fluid of correct manufacturer-grade needs to be used along with preventing contact between previously drained fluid because it poses risks of contamination and cause harm. The brake fluid harms painted surfaces and plastic materials so immediately spray off the spill with water. Do not let brake fluid touch the back adhesive of brake pads since this contact could weaken the caliper pad connection thus requiring you to replace the brake pads. The specified brake parts cleaner is the only acceptable solution because any residue might damage adhesion quality.