How to Service the Brake Line Flexible Hoses on 2009 Ford E-150?

The service process for brake flexible hoses begins by taking off both wheel and tire. The brake caliper flow bolt must be removed and both copper washers will need discarding but installer should tighten the new bolt to 40 Nm (30 lb-ft) torque specification. Follow this procedure to disconnect the LH brake flexible hose junction block tube fitting before installing it at 18 Nm (159 lb-in). Install the new RH brake flexible hose by disconnecting its bracket bolt then hose before installing it with 25 Nm (18 lb-ft) torque. The LH brake flexible hose serviced with the axle vent tube requires the driver to disconnect the brake fitting tube and tighten to 18 Nm (159 lb-in) when reinstalling. Ongoing service of the LH brake flexible hose includes removing its retaining clip before extracting the axle vent and hose. The technician installs the new hose by tightening it to 17 Nm (150 lb-in). After completing the service bleeding one should reverse the installation process for the RH and LH flexible brake hoses before finishing the maintenance work. Utilize fresh brake fluid from an approved manufacturer that adheres to specifications while taking caution not to let brake fluid contact painted or plastic surfaces since any leakage needs immediate water cleaning.

OEM 2009 Ford E-150 Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Brake Lines found

View related parts
2009 Ford E-150 Flex Hose, Rear Driver Side
Part Number: 8C2Z-2A442-C
$60.11 MSRP: $98.91
You Save: $38.80 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Hose Assembly; Brake Hydraulic Line, Rear Left; Hydraulic Hose; Brake Hose; Brake Line
- Position: Rear Driver Side
- Replaces: BRHR-79, 8C2Z-2A442-CL
- Item Weight: 2.60 Pounds
- Item Dimensions: 4.1 x 17.5 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8C2Z-2A442-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford E-150 Submodels:
- Base, XL, XLT | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
2009 Ford E-150 Flex Hose, Front Driver Side
Part Number: 8C2Z-2078-BL
$68.29 MSRP: $112.36
You Save: $44.07 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front Left; Brake Hose; Brake Line; Hydraulic Hose
- Position: Front Driver Side
- Base No.: 2078
- Item Weight: 0.80 Pounds
- Item Dimensions: 1.3 x 3.0 x 22.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8C2Z-2078-BL
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford E-150 Submodels:
- Base, XL, XLT | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
2009 Ford E-150 Flex Hose, Front Passenger Side
Part Number: 8C2Z-2078-BR
$64.55 MSRP: $108.36
You Save: $43.81 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front Right; Brake Hose; Brake Line; Hydraulic Hose
- Position: Front Passenger Side
- Base No.: 2078
- Item Weight: 0.70 Pounds
- Item Dimensions: 1.3 x 3.2 x 23.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8C2Z-2078-BR
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford E-150 Submodels:
- Base, XL, XLT | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
2009 Ford E-150 Flex Hose, Driver Side
Part Number: 8C2Z-2A442-EL
Product Specifications
- Other Name: Hose Assembly; Hydraulic Hose; Brake Hose; Brake Line
- Position: Driver Side
- Base No.: 2A442B
- Item Weight: 2.30 Pounds
- Item Dimensions: 8.6 x 3.3 x 21.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8C2Z-2A442-EL
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford E-150 Submodels:
- Base, XL, XLT | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
2009 Ford E-150 Flex Hose, Passenger Side
Part Number: 8C2Z-2A442-CR
Product Specifications
- Other Name: Hose Assembly; Hydraulic Hose; Brake Hose; Brake Line
- Position: Passenger Side
- Base No.: 2A442A
- Item Weight: 0.70 Pounds
- Item Dimensions: 1.0 x 7.1 x 45.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8C2Z-2A442-CR
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford E-150 Submodels:
- Base, XL, XLT | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG

2009 Ford E-150 Brake Line

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford E-150 Brake Line available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford E-150 Brake Line as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford E-150 Brake Line Parts Questions & Experts Answers

Q: How to Service the Brake Line Flexible Hoses on 2009 Ford E-150?
A: The service process for brake flexible hoses begins by taking off both wheel and tire. The brake caliper flow bolt must be removed and both copper washers will need discarding but installer should tighten the new bolt to 40 Nm (30 lb-ft) torque specification. Follow this procedure to disconnect the LH brake flexible hose junction block tube fitting before installing it at 18 Nm (159 lb-in). Install the new RH brake flexible hose by disconnecting its bracket bolt then hose before installing it with 25 Nm (18 lb-ft) torque. The LH brake flexible hose serviced with the axle vent tube requires the driver to disconnect the brake fitting tube and tighten to 18 Nm (159 lb-in) when reinstalling. Ongoing service of the LH brake flexible hose includes removing its retaining clip before extracting the axle vent and hose. The technician installs the new hose by tightening it to 17 Nm (150 lb-in). After completing the service bleeding one should reverse the installation process for the RH and LH flexible brake hoses before finishing the maintenance work. Utilize fresh brake fluid from an approved manufacturer that adheres to specifications while taking caution not to let brake fluid contact painted or plastic surfaces since any leakage needs immediate water cleaning.