FordParts
My Garage
My Account
Cart
OEM 2009 Ford E-250 Slip Yoke
Transmission Slip Yoke- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Slip Yokes found
2009 Ford E-250 Slip Yoke Part Number: 5C2Z-4841-A
$166.25 MSRP: $242.00You Save: $75.75 (32%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Flange - Coupling; Double Cardan CV Centering Yoke; Driveshaft Yokes
- Base No.: 4841
- Item Weight: 10.30 Pounds
- Item Dimensions: 10.2 x 7.3 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5C2Z-4841-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford E-250 Companion Flange Part Number: 9C2Z-4851-A
$78.27 MSRP: $120.45You Save: $42.18 (36%)Ships in 1 Business DayProduct Specifications- Other Name: Flange
- Replaces: F7UZ-4851-AA, 6C2Z-4851-A
- Base No.: 4851
- Item Weight: 3.30 Pounds
- Item Dimensions: 7.1 x 5.2 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9C2Z-4851-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford E-250 Universal Joints, Rear Part Number: BU2Z-4635-A
Product Specifications- Other Name: Kit - Universal Joint Repair; Drive Shaft Slip Yoke, Rear; CV Joint; U Joint; Flange; Coupling
- Position: Rear
- Replaces: 4L3Z-4782-AB
- Base No.: 4782
- Item Weight: 3.10 Pounds
- Item Dimensions: 14.4 x 8.2 x 7.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BU2Z-4635-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford E-250 Intermediate Shaft, Center Part Number: 6C2Z-3E751-AA
$185.70 MSRP: $249.51You Save: $63.81 (26%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Shaft Assembly - Steering; Steering Shaft Universal Joint; Steering Shaft, Center; Shaft Assembly; Intermed Shaft; Coupling; Steering Shaft
- Position: Center
- Replaces: 1C2Z-3E751-AA
- Base No.: 3E751
- Item Weight: 2.00 Pounds
- Item Dimensions: 6.2 x 6.1 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6C2Z-3E751-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford E-250 Slip Yoke
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford E-250 Slip Yoke available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford E-250 Slip Yoke as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Ford E-250 Slip Yoke Parts Q&A
- Q: How to service and repair the driveshaft slip yoke on 2009 Ford E-250?A: A proper workbench serves as the starting point for slip yoke repair work by placing the driveshaft there but avoid trapping it using a vise. The driveshaft slip-yoke service starts with clip removal of the slip-yoke boot clamps before extracting both the slip-yoke and boot from the driveshaft. Thoroughly check the boot for any signs of damage before proceeding to replace it. The inspection should start with checking the driveshaft spline lubricant as well as the slip-yoke's lubricant status. Both components need replacing if they show signs of wear or contain contaminations. To install the new slip-yoke boot clamp place it on the driveshaft stub shaft then insert the small opening of the slip-yoke boot onto the stub shaft. Use the Keystone Clamp Installer to secure the slip-yoke boot clamp after which attach the slip-yoke to the driveshaft through putting the boot end into the driveshaft while providing approximately 10g (0.24oz) of grease to the splines. Begin by placing a new large slip-yoke boot clamp then set the blind splines correctly before installing the slip-yoke. Measure the assembled driveshaft length from stub shaft weld to U-joint centerline before evaluating slip-yoke boot position in its groove and removing boot and slip-yoke surface grease. The slip-yoke boot needs air bleeding before using the Keystone Clamp Installer to secure the large slip-yoke boot clamp.