FordParts
My Garage
My Account
Cart
OEM 2009 Ford Edge Brake Master Cylinder
- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Brake Master Cylinder found
2009 Ford Edge Master Cylinder Part Number: CT4Z-2140-A
$96.25 MSRP: $158.36You Save: $62.11 (40%)Ships in 1 Business DayProduct Specifications- Other Name: Cylinder Assembly - Master; Brake Master Cylinder
- Replaces: 7T4Z-2140-A, BRMC-102, BRMC-117, BT4Z-2140-A
- Base No.: 2140
- Item Weight: 2.80 Pounds
- Item Dimensions: 4.2 x 5.1 x 9.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: CT4Z-2140-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Edge Brake Master Cylinder
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Edge Brake Master Cylinder available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Edge Brake Master Cylinder as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Ford Edge Brake Master Cylinder Parts Q&A
- Q: How to remove and replace the brake master cylinder on 2009 Ford Edge?A: Before changing the brake master cylinder work with manufacturer-approved brake fluid which should be fresh and clean because contaminated fluid can harm the system and injure the user. Review all product label cautions carefully and obtain emergency medical help according to the information provided. You should prevent brake fluid from touching painted or plastic areas except in cases of spillage when washing with water becomes necessary. The air cleaner and its outlet tube should be removed first before proceeding with the battery and battery tray removal. The procedure requires disconnecting the brake booster check valve before master cylinder removal as the master cylinder seal should not be extracted into the brake booster. The brake fluid level switch electrical connector needs disconnection alongside the master cylinder brake tube fittings before plugging in both tubes and ports of the master cylinder. During installation secure the brake tube fittings with a torque of 28 Nm (21 lb-ft) and the two brake master cylinder nuts need a torque setting of 25 Nm (18 lb-ft). Remove the brake master cylinder together with its reservoir before reinstallation while the installation process requires the reversal of removal steps along with a master cylinder bleeding operation.