FordParts
My Garage
My Account
Cart
OEM 2009 Ford Edge Sway Bar Link
Stabilizer Sway Bar Link- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Sway Bar Links found
2009 Ford Edge Stabilizer Link, Front Part Number: 7T4Z-5K483-A
$56.80 MSRP: $93.45You Save: $36.65 (40%)Ships in 1 Business DayProduct Specifications- Other Name: Link; Suspension Stabilizer Bar Link, Front; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Position: Front
- Base No.: 5K483
- Item Weight: 1.10 Pounds
- Item Dimensions: 1.0 x 5.0 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 7T4Z-5K483-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Edge Stabilizer Link, Rear Part Number: 7T4Z-5A486-AA
$75.22 MSRP: $109.48You Save: $34.26 (32%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Link; Suspension Stabilizer Bar Link, Rear; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Position: Rear
- Base No.: 5A486
- Item Weight: 0.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 7T4Z-5A486-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Edge Sway Bar Link
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Edge Sway Bar Link available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Edge Sway Bar Link as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Ford Edge Sway Bar Link Parts Q&A
- Q: How to service and repair the rear suspension sway bar link on 2009 Ford Edge?A: Service and repair operations on the rear suspension sway bar link must begin after parking the vehicle in neutral position on a hoist. Install new nuts on the sway bar link after removing its upper nuts until they reach 40 Nm (30 lb-ft) torque. Then remove the lower nuts of the sway bar link before taking out the bar links while installing fresh nuts then tightening to 40 Nm (30 lb-ft). First remove sway bar bracket nuts and discard them before taking out sway bar brackets and bar while tightening new nuts to 55 Nm (41 lb-ft). Examine the sway bar bushings and change them to new components when required. Following the removal procedure reverse the installation to finish the work. New parts installed must receive same part numbers or equivalents and torque values must be applied exactly as specified for suspension system integrity.