How to service the rear ABS sensor on 2009 Ford Escape?

Service of the rear ABS sensor begins with locking the vehicle on a hoist in NEUTRAL position. It is essential to remove the grommet from the body while keeping it undamaged, as a damaged grommet will require the replacement of a new sensor even if the sensor itself is operational. Position the grommet so that a small screwdriver can reach two tabs which extend at right angles from the sensor wire. Disengage the electrical connector from the rear ABS sensor before you remove the sensor harness from the harness retainer. You can then uninstall the three harness bolts that need tightening to 9 Nm (80 lb-in) for installation. The process should begin with cleaning away any accumulated debris from around the sensor before unfastening its bolt from the wheel knuckle. The mounting surface where you place the sensor should receive a full cleaning once you remove it. The relevant installation procedure involves inverting removal steps, then securing the rear ABS sensor bolt at 9 Nm (80 lb-in).

OEM 2009 Ford Escape ABS Sensor

ABS Wheel Speed Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 ABS Sensors found

View related parts
2009 Ford Escape ABS Sensor, Rear Driver Side
Part Number: 9L8Z-2C191-A
$55.12 MSRP: $92.36
You Save: $37.24 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Rear Left; Rear Speed Sensor
- Manufacturer Note: Rear
- Position: Rear Driver Side
- Base No.: 2C190
- Item Weight: 0.60 Pounds
- Item Dimensions: 7.4 x 2.6 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L8Z-2C191-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Escape Submodels:
- Hybrid, Limited, Limited Hybrid, XLS, XLT | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2009 Ford Escape ABS Sensor, Front Passenger Side
Part Number: 9L8Z-2C204-A
$45.55 MSRP: $72.33
You Save: $26.78 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Front Right; Front Speed Sensor
- Position: Front Passenger Side
- Base No.: 2C204
- Item Weight: 0.70 Pounds
- Item Dimensions: 15.8 x 10.9 x 0.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L8Z-2C204-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Escape Submodels:
- Hybrid, Limited, Limited Hybrid, XLS, XLT | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2009 Ford Escape ABS Sensor, Front Driver Side
Part Number: 9L8Z-2C205-A
$43.33 MSRP: $68.80
You Save: $25.47 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Front Left; ABS Speed Sensor; Front Speed Sensor; ABS Wheel Speed Sensor
- Position: Front Driver Side
- Base No.: 2C204
- Item Weight: 0.70 Pounds
- Item Dimensions: 15.6 x 10.8 x 0.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L8Z-2C205-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Escape Submodels:
- Hybrid, Limited, Limited Hybrid, XLS, XLT | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2009 Ford Escape ABS Sensor, Rear Passenger Side
Part Number: 9L8Z-2C190-A
$45.90 MSRP: $72.89
You Save: $26.99 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Rear Right; Rear Speed Sensor
- Manufacturer Note: Rear
- Position: Rear Passenger Side
- Base No.: 2C190
- Item Weight: 0.60 Pounds
- Item Dimensions: 7.6 x 2.6 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L8Z-2C190-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Escape Submodels:
- Hybrid, Limited, Limited Hybrid, XLS, XLT | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

2009 Ford Escape ABS Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Escape ABS Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Escape ABS Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Escape ABS Sensor Parts Questions & Experts Answers

Q: How to service the rear ABS sensor on 2009 Ford Escape?
A: Service of the rear ABS sensor begins with locking the vehicle on a hoist in NEUTRAL position. It is essential to remove the grommet from the body while keeping it undamaged, as a damaged grommet will require the replacement of a new sensor even if the sensor itself is operational. Position the grommet so that a small screwdriver can reach two tabs which extend at right angles from the sensor wire. Disengage the electrical connector from the rear ABS sensor before you remove the sensor harness from the harness retainer. You can then uninstall the three harness bolts that need tightening to 9 Nm (80 lb-in) for installation. The process should begin with cleaning away any accumulated debris from around the sensor before unfastening its bolt from the wheel knuckle. The mounting surface where you place the sensor should receive a full cleaning once you remove it. The relevant installation procedure involves inverting removal steps, then securing the rear ABS sensor bolt at 9 Nm (80 lb-in).