How to properly bleed a brake caliper on 2009 Ford Escape?

The brake bleeding process requires using fresh brake fluid approved by the manufacturer which needs to be processed independently of drained fluid to maintain system cleanliness and system components. The proper braking function demands that the brake master cylinder stay filled throughout the bleeding process. Brake fluid spills should never touch painted or plastic surfaces yet immediate water cleaning is necessary to remove any fluid dripping onto such materials. The brake system needs no full bleed when the brake caliper was either disconnected or had new installation. The bleeder screw cap needs removal as you install a box-end wrench on the bleeder screw. The bleeder screw requires a rubber drain hose attachment to a fluid reservoir which contains clean specified brake fluid. Your assistant should pull the brake pedal twice before maintaining constant force on it. After the bleeder screw releases brake fluid there must be a pedal pressure held by the assistant before you tighten the screw again. The user should continue the braked vessel evacuations until they achieve fluid clarity with no bubble formation before restocking the brake master cylinder container with fluid. You must first retract the bleeder screw enough to produce a brake fluid stream before retightening it to specification and removing the rubber hose together with replacing the bleeder screw cap. The braking system needs multiple tests to verify its correct operation.

OEM 2009 Ford Escape Brake Caliper

Caliper

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Brake Calipers found

View related parts
2009 Ford Escape Caliper, Front Passenger Side
Part Number: 9L8Z-2B120-A
$69.71 MSRP: $115.27
You Save: $45.56 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly - Brake - Less Pad; Disc Brake Caliper, Front Right; Brake Caliper Repair Kit; Caliper Assembly - Brake - Less Pads; Brake Caliper
- Position: Front Passenger Side
- Base No.: 2B120
- Item Weight: 11.50 Pounds
- Item Dimensions: 8.4 x 5.6 x 7.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L8Z-2B120-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Escape Submodels:
- Hybrid, Limited, Limited Hybrid, XLS, XLT | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2009 Ford Escape Caliper, Front Driver Side
Part Number: 9L8Z-2B121-A
$49.16 MSRP: $78.60
You Save: $29.44 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly - Brake - Less Pad; Disc Brake Caliper, Front Left; Brake Caliper Repair Kit; Caliper Assembly - Brake - Less Pads; Brake Caliper
- Position: Front Driver Side
- Base No.: 2B120
- Item Weight: 11.90 Pounds
- Item Dimensions: 8.2 x 5.7 x 8.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L8Z-2B121-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Escape Submodels:
- Hybrid, Limited, Limited Hybrid, XLS, XLT | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2009 Ford Escape Caliper, Rear Passenger Side
Part Number: 6L8Z-2553-A
Product Specifications
- Other Name: Housing; Disc Brake Caliper, Rear Right; Brake Caliper Repair Kit; Brake Caliper
- Position: Rear Passenger Side
- Replaces: 5L8Z-2553-AB
- Base No.: 2552
- Item Weight: 5.20 Pounds
- Item Dimensions: 8.3 x 6.8 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L8Z-2553-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Escape Submodels:
- Hybrid, Limited, Limited Hybrid, XLS, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2009 Ford Escape Caliper, Rear Driver Side
Part Number: 6L8Z-2552-A
Product Specifications
- Other Name: Housing; Disc Brake Caliper, Rear Left; Brake Caliper Repair Kit; Brake Caliper
- Position: Rear Driver Side
- Replaces: 5L8Z-2552-AB
- Base No.: 2552
- Item Weight: 5.60 Pounds
- Item Dimensions: 8.2 x 6.7 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L8Z-2552-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Escape Submodels:
- Hybrid, Limited, Limited Hybrid, XLS, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2009 Ford Escape Caliper, Front Driver Side
Part Number: 7L8Z-2B121-B
Product Specifications
- Other Name: Caliper Assembly - Brake; Disc Brake Caliper, Front Left; Brake Caliper Repair Kit; Caliper Assembly - Brake - Less Pads; Brake Caliper
- Manufacturer Note: Warranty Eligible
- Position: Front Driver Side
- Replaces: 5L8Z-2B121-AA
- Base No.: 2B120
- Item Weight: 11.00 Pounds
- Item Dimensions: 8.8 x 5.5 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L8Z-2B121-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Escape Submodels:
- Hybrid, Limited, Limited Hybrid, XLS, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2009 Ford Escape Caliper, Front Passenger Side
Part Number: 7L8Z-2B120-B
Product Specifications
- Other Name: Caliper Assembly - Brake - Less Pad; Disc Brake Caliper, Front Right; Brake Caliper Repair Kit; Caliper Assembly - Brake - Less Pads; Brake Caliper
- Manufacturer Note: Warranty Eligible
- Position: Front Passenger Side
- Replaces: 5L8Z-2221-AA, 5L8Z-2B120-AB, 5L8Z-2221-A
- Base No.: 2B120
- Item Weight: 11.70 Pounds
- Item Dimensions: 8.8 x 5.4 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L8Z-2B120-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Escape Submodels:
- Hybrid, Limited, Limited Hybrid, XLS, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

2009 Ford Escape Brake Caliper

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Escape Brake Caliper available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Escape Brake Caliper as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Escape Brake Caliper Parts Questions & Experts Answers

Q: How to properly bleed a brake caliper on 2009 Ford Escape?
A: The brake bleeding process requires using fresh brake fluid approved by the manufacturer which needs to be processed independently of drained fluid to maintain system cleanliness and system components. The proper braking function demands that the brake master cylinder stay filled throughout the bleeding process. Brake fluid spills should never touch painted or plastic surfaces yet immediate water cleaning is necessary to remove any fluid dripping onto such materials. The brake system needs no full bleed when the brake caliper was either disconnected or had new installation. The bleeder screw cap needs removal as you install a box-end wrench on the bleeder screw. The bleeder screw requires a rubber drain hose attachment to a fluid reservoir which contains clean specified brake fluid. Your assistant should pull the brake pedal twice before maintaining constant force on it. After the bleeder screw releases brake fluid there must be a pedal pressure held by the assistant before you tighten the screw again. The user should continue the braked vessel evacuations until they achieve fluid clarity with no bubble formation before restocking the brake master cylinder container with fluid. You must first retract the bleeder screw enough to produce a brake fluid stream before retightening it to specification and removing the rubber hose together with replacing the bleeder screw cap. The braking system needs multiple tests to verify its correct operation.