How to service and repair the AM/FM antenna cable on 2009 Ford Expedition?

You can begin the service process of the AM/FM antenna cable by removing the Audio Control Module (ACM). Start by removing the right-hand (RH) scuff plate together with the RH A-pillar lower trim panel. The AM/FM antenna cable should have its connection point disabled. Replacing the rear AM/FM antenna cable is impossible because it forms a critical part of the wiring harness therefore you should remove its ends and secure the remaining portion to the harness with tape to avoid noise interference. To avoid noise you should fasten the new antenna cable with tape or wire ties to the wiring harness. The installation process ends by following the reversal of removal steps.

OEM 2009 Ford Expedition Antenna Cable

Radio Antenna Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Antenna Cables found

View related parts
2009 Ford Expedition Antenna Cable Part Number: AL1Z-18812-C
Product Specifications
- Other Name: Cable Assembly - Extension; Cable Assembly
- Replaces: 7L1Z-18812-C
- Base No.: 18812A
- Item Weight: 0.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AL1Z-18812-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- EL Eddie Bauer, EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Expedition Antenna Cable Part Number: AL1Z-18812-B
Product Specifications
- Other Name: Cable Assembly - Extension; Cable Assembly
- Replaces: 7L1Z-18812-B
- Base No.: 18812B
- Item Weight: 0.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AL1Z-18812-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Expedition Antenna Cable Part Number: AL1Z-18812-A
Product Specifications
- Other Name: Cable Assembly - Extension; Cable Assembly
- Replaces: 7L1Z-18812-A
- Base No.: 18812A
- Item Weight: 0.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AL1Z-18812-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, Funkmaster Flex Edition, King Ranch, Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS

2009 Ford Expedition Antenna Cable

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Expedition Antenna Cable available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Expedition Antenna Cable as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Expedition Antenna Cable Parts Q&A

Q: How to service and repair the AM/FM antenna cable on 2009 Ford Expedition?
A: You can begin the service process of the AM/FM antenna cable by removing the Audio Control Module (ACM). Start by removing the right-hand (RH) scuff plate together with the RH A-pillar lower trim panel. The AM/FM antenna cable should have its connection point disabled. Replacing the rear AM/FM antenna cable is impossible because it forms a critical part of the wiring harness therefore you should remove its ends and secure the remaining portion to the harness with tape to avoid noise interference. To avoid noise you should fasten the new antenna cable with tape or wire ties to the wiring harness. The installation process ends by following the reversal of removal steps.