FordParts
My Garage
My Account
Cart
OEM 2009 Ford Expedition Power Steering Pump
Power Steering Pump Unit- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Power Steering Pump found
2009 Ford Expedition Power Steering Pump Part Number: 7L1Z-3A674-BRM
$156.80 MSRP: $261.49You Save: $104.69 (41%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Remanufactured Pump Assembly - Power Steering; Pump Assembly - Power Steering
- Replaces: 7L1Z-3A674-B, STP-218, 7L1Z-3A674-A, STP-181
- Base No.: 3A674
- Item Weight: 6.90 Pounds
- Item Dimensions: 4.8 x 5.2 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L1Z-3A674-BRM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Expedition Power Steering Pump
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Expedition Power Steering Pump available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Expedition Power Steering Pump as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Ford Expedition Power Steering Pump Parts Q&A
- Q: How to service and repair the power steering pump on 2009 Ford Expedition?A: The power steering pump service requires users to remove its pulley before proceeding. The extract of power steering fluid requires a proper suction device to work from the reservoir. Unclamp and then disconnect the power steering fluid reservoir-to-pump supply hose before unscrewing the power steering pressure line bracket-to-engine nut when placing it back ensure proper torque is 40 Nm (30 lb-ft). After taking off the power steering pressure line from its fitting you should dispose of the old Teflon(R) seal while tightening the new fitting to 65 Nm (48 lb-ft) torque settings during engine assembly. The power steering pump has three securing bolts which must be removed before tightening them to 25 Nm (18 lb-ft) torque during reinstallation. The reinstall process starts with using the Teflon(R) Seal Installer Set to place a fresh Teflon(R) seal on the pressure line-to-pump fitting followed by filling the power steering system.