How to service the evaporator core on 2009 Ford Explorer?

A vacuum leak test should be performed first to detect any leaks before you detach the evaporator core. The first step should involve removing the heater core. Start by unbolting the five outer screws on the evaporator core cover then proceed with unfastening the six inner screws on the same component. Analytically remove the evaporator core cover from the heater core and evaporator core housing before discarding the rope seal. The processing of the evaporator core includes taking it out before reinstalling it by following the initial removal steps. A bead of RTV sealant must be applied to the entire evaporator core housing groove joint where the rope seal used to be before tightening the evaporator core cover screws diagonally as an even distribution technique.

OEM 2009 Ford Explorer Evaporator

A/C Evaporator Core

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Evaporators found

View related parts
2009 Ford Explorer Evaporator Core, Rear Part Number: 6L2Z-19860-EB
$186.49 MSRP: $257.98
You Save: $71.49 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Core - Air Conditioning Evaporator; A/C Evaporator Core, Rear; A/C Evaporator Core Repair Kit; A/C Evaporator Core; A/C Evaporator; Evaporator
- Manufacturer Note: Includes A/C Evaporator Expansion Valve That Is Not Serviced Separately
- Position: Rear
- Base No.: 19860
- Item Weight: 7.00 Pounds
- Item Dimensions: 13.5 x 13.2 x 11.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L2Z-19860-EB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Explorer Submodels:
- Eddie Bauer, Limited, NBX, XLS, XLS Sport, XLT, XLT Sport | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2009 Ford Explorer Evaporator Core Part Number: 9L2Z-19850-A
Product Specifications
- Other Name: Evaporator Assembly; A/C Evaporator Core and Case; HVAC Unit; Repair Kit; Heater Core.; Housing Assembly; Case Assembly
- Replaces: 8L2Z-19850-A
- Base No.: 19850
- Item Weight: 18.50 Pounds
- Item Dimensions: 34.9 x 23.9 x 17.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L2Z-19850-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Explorer Submodels:
- Eddie Bauer, Limited, XLS, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2009 Ford Explorer Evaporator Core Part Number: 9L2Z-19850-B
Product Specifications
- Other Name: Evaporator Assembly; A/C Evaporator Core and Case; HVAC Unit; Repair Kit; Heater Core; Housing Assembly; Case Assembly
- Replaces: 8L2Z-19850-B
- Base No.: 19850
- Item Weight: 15.20 Pounds
- Item Dimensions: 34.9 x 24.6 x 17.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L2Z-19850-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Explorer Submodels:
- Eddie Bauer, Limited, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS

2009 Ford Explorer Evaporator

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Explorer Evaporator available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Explorer Evaporator as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Explorer Evaporator Parts Q&A

Q: How to service the evaporator core on 2009 Ford Explorer?
A: A vacuum leak test should be performed first to detect any leaks before you detach the evaporator core. The first step should involve removing the heater core. Start by unbolting the five outer screws on the evaporator core cover then proceed with unfastening the six inner screws on the same component. Analytically remove the evaporator core cover from the heater core and evaporator core housing before discarding the rope seal. The processing of the evaporator core includes taking it out before reinstalling it by following the initial removal steps. A bead of RTV sealant must be applied to the entire evaporator core housing groove joint where the rope seal used to be before tightening the evaporator core cover screws diagonally as an even distribution technique.