How to service the ignition coil on 2009 Ford Explorer?

The service of ignition coil begins with disconnecting the electrical connectors of ignition coil and radio noise suppressor. Before upward pull exists the spark plug wire boot you must twist it to guard against spark plug wire harm. Maintain the correct terminations on the spark plug wires when connecting them to the ignition coil. Users should remove the ignition coil's spark plug wires by compressing the connector tabs then turning until they can pull the wires up. To start the replacement disconnect the four bolts that secure the ignition coil. The installation of the new ignition coil should begin with tightening bolts to 53 lb-in (6 Nm) followed by silicone dielectric compound application inside ignition coil boots before reinstating the removal steps.

OEM 2009 Ford Explorer Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Ignition Coils found

View related parts
2009 Ford Explorer Ignition Coil Part Number: FOTZ-12029-A
$83.87 MSRP: $138.00
You Save: $54.13 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil Assembly - Ignition; Distributor Less Coil; Coil
- Manufacturer Note: OHV, SOHC
- Base No.: 12029
- Item Weight: 4.40 Pounds
- Item Dimensions: 8.2 x 4.5 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: FOTZ-12029-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Explorer Submodels:
- Eddie Bauer, Expedition, Limited, NBX, Postal, Sport, XL, XL Fleet, XLS, XLS Sport, XLT, XLT Sport | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2009 Ford Explorer Ignition Coil, Brown Part Number: 8L3Z-12029-A
$46.03 MSRP: $73.09
You Save: $27.06 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Coil Assembly - Ignition; Direct Ignition Coil; Direct Ignition Coil Oe Quality; Coil On Plug Coil; Ignition Coil Set; Coil
- Manufacturer Note: With Brown Coil Boots
- Base No.: 12029
- Item Weight: 0.60 Pounds
- Item Dimensions: 8.5 x 7.7 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L3Z-12029-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Explorer Submodels:
- Eddie Bauer, Limited, XLT | 8 Cyl 4.6 L GAS

2009 Ford Explorer Ignition Coil

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Explorer Ignition Coil available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Explorer Ignition Coil as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Explorer Ignition Coil Parts Q&A

Q: How to service the ignition coil on 2009 Ford Explorer?
A: The service of ignition coil begins with disconnecting the electrical connectors of ignition coil and radio noise suppressor. Before upward pull exists the spark plug wire boot you must twist it to guard against spark plug wire harm. Maintain the correct terminations on the spark plug wires when connecting them to the ignition coil. Users should remove the ignition coil's spark plug wires by compressing the connector tabs then turning until they can pull the wires up. To start the replacement disconnect the four bolts that secure the ignition coil. The installation of the new ignition coil should begin with tightening bolts to 53 lb-in (6 Nm) followed by silicone dielectric compound application inside ignition coil boots before reinstating the removal steps.