How to service and repair the ignition coil on 2008 Ford Explorer?

Starting the process of ignition coil maintenance requires disconnecting both the electrical connector and radio noise suppressor electrical connector. You should maintain control of the spark plug wire boot during upward traction because thisuards both the wire and its designated ignition coil terminal. To remove the spark plug wires from the ignition coil you should simultaneously squeeze the tabs and twist before lifting upward. Use tools to eliminate the four bolted ignition coil attachments. The installation procedure requires tightening the bolts to 6 Nm (53 lb-in) while applying silicone dielectric compound inside the boots before performing the reverse removal steps for completion.

OEM 2008 Ford Explorer Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Ignition Coils found

View related parts
2008 Ford Explorer Ignition Coil Part Number: FOTZ-12029-A
$83.87 MSRP: $138.00
You Save: $54.13 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil Assembly - Ignition; Distributor Less Coil; Coil
- Manufacturer Note: OHV, SOHC
- Base No.: 12029
- Item Weight: 4.40 Pounds
- Item Dimensions: 8.2 x 4.5 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: FOTZ-12029-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Explorer Submodels:
- Eddie Bauer, Expedition, Limited, NBX, Postal, Sport, XL, XL Fleet, XLS, XLS Sport, XLT, XLT Sport | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2008 Ford Explorer Ignition Coil, Black Part Number: 3L3Z-12029-BA
$49.28 MSRP: $81.09
You Save: $31.81 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Coil Assembly - Ignition; Direct Ignition Coil; Direct Ignition Coil Oe Quality; Coil On Plug Coil; Ignition Coil Set; Coil
- Manufacturer Note: With Black Coil Boots
- Base No.: 12029
- Item Weight: 0.70 Pounds
- Item Dimensions: 8.4 x 8.0 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3L3Z-12029-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Explorer Submodels:
- Eddie Bauer, Limited, XLT | 8 Cyl 4.6 L GAS
View related parts
2008 Ford Explorer Ignition Coil, Brown Part Number: 8L3Z-12029-A
$46.03 MSRP: $73.09
You Save: $27.06 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Coil Assembly - Ignition; Direct Ignition Coil; Direct Ignition Coil Oe Quality; Coil On Plug Coil; Ignition Coil Set; Coil
- Manufacturer Note: With Brown Coil Boots
- Base No.: 12029
- Item Weight: 0.60 Pounds
- Item Dimensions: 8.5 x 7.7 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L3Z-12029-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Explorer Submodels:
- Eddie Bauer, Limited, XLT | 8 Cyl 4.6 L GAS

2008 Ford Explorer Ignition Coil

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Explorer Ignition Coil available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Explorer Ignition Coil as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford Explorer Ignition Coil Parts Q&A

Q: How to service and repair the ignition coil on 2008 Ford Explorer?
A: Starting the process of ignition coil maintenance requires disconnecting both the electrical connector and radio noise suppressor electrical connector. You should maintain control of the spark plug wire boot during upward traction because thisuards both the wire and its designated ignition coil terminal. To remove the spark plug wires from the ignition coil you should simultaneously squeeze the tabs and twist before lifting upward. Use tools to eliminate the four bolted ignition coil attachments. The installation procedure requires tightening the bolts to 6 Nm (53 lb-in) while applying silicone dielectric compound inside the boots before performing the reverse removal steps for completion.