FordParts
My Garage
My Account
Cart
OEM 2009 Ford Explorer Sport Trac Fan Shroud
Radiator Fan Shroud- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Fan Shrouds found
2009 Ford Explorer Sport Trac Fan Shroud, Upper Part Number: 6L2Z-8146-B
$106.13 MSRP: $154.48You Save: $48.35 (32%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Shroud - Radiator Fan; Engine Cooling Fan Shroud, Upper; Upper Shroud
- Position: Upper
- Base No.: 8146
- Item Weight: 6.80 Pounds
- Item Dimensions: 7.9 x 34.0 x 30.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L2Z-8146-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Shroud - Radiator Fan; Engine Cooling Fan Shroud, Upper; Upper Shroud
- Position: Upper
- Base No.: 8146
- Item Weight: 6.80 Pounds
- Item Dimensions: 8.3 x 34.6 x 30.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L2Z-8146-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Explorer Sport Trac Fan Shroud
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Explorer Sport Trac Fan Shroud available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Explorer Sport Trac Fan Shroud as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Ford Explorer Sport Trac Fan Shroud Parts Q&A
- Q: How to service the cooling fan shroud equipped with a 4.6L (3V) engine on 2009 Ford Explorer Sport Trac?A: The cooling fan shroud servicing process starts with taking out the Air Cleaner (ACL) outlet pipe before removing the coolant expansion tank. Carefully disassemble the power steering fluid reservoir by removing its retaining bolt and place it to the side while you tighten the bolt to 10 Nm (89 lb-in) when reattaching it. After unfastening the two bolts you can disconnect and extract the upper fan shroud but reinstall it at 7 Nm (62 lb-in). When servicing the fan clutch installation, disconnect its electrical connector at the same time remove the wrench bracket bolt from the harness and ensure a torque of 7 Nm (62 lb-in) on reinstallation. Proper caution must be taken to stop loading the fan clutch coil from the side because it could lead to damage. The removal of the cooling fan needs both the Fan Pulley Holding Wrench and the Fan Clutch Nut Wrench to achieve the correct torque specification of 55 Nm (41 lb-ft) during reassembly. The last step following this procedure is the removal of two lower fan shroud bolts while reinstalling them with 7 Nm (62 lb-in) torque before reversing all removal steps.