How to service and repair the steering angle sensor on 2009 Ford F-150?

To restore the operation of the steering angle sensor, unscrew the electrical connector, remove the two mounting bolts and replace the sensor, screwing in the mounting bolts to 3 Nm (27 lb-in). To avoid a DTC, calibrate the sensor by turning the steering wheel lock-to-lock at least 2 times with starting the engine.

OEM 2009 Ford F-150 Steering Angle Sensor

Steering Column Angle Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Steering Angle Sensor found

View related parts
2009 Ford F-150 Position Sensor Part Number: 9L1Z-3F818-A
$103.47 MSRP: $150.62
You Save: $47.15 (32%)
Product Specifications
- Other Name: Sensor - Steering Rotation; Steering Wheel Position Sensor; Steering Wheel Speed Sensor; Steering Angle Sensor; Steering Sensor Assembly; Sensor
- Replaces: 7L1Z-3F818-A
- Base No.: 3F818
- Item Weight: 0.30 Pounds
- Item Dimensions: 9.5 x 7.2 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L1Z-3F818-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford F-150 Submodels:
- FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Platinum, STX, SVT Raptor, XL, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 6.2 L GAS

2009 Ford F-150 Steering Angle Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford F-150 Steering Angle Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford F-150 Steering Angle Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford F-150 Steering Angle Sensor Parts Q&A

Q: How to service and repair the steering angle sensor on 2009 Ford F-150?
A: To restore the operation of the steering angle sensor, unscrew the electrical connector, remove the two mounting bolts and replace the sensor, screwing in the mounting bolts to 3 Nm (27 lb-in). To avoid a DTC, calibrate the sensor by turning the steering wheel lock-to-lock at least 2 times with starting the engine.