How to remove and replace the right-hand exhaust manifold on 2009 Ford F-250 Super Duty?

First set the transmission to neutral gear position and position the vehicle on a hoist before starting right-hand exhaust manifold replacement. Start by removing applicable components such as transmission filler tube then starter then the right-hand inner fenderwell. Start the exhaust replacement process by taking off four exhaust Y-pipe flange nuts before removing the two bolts that secure the exhaust manifold heat shield and finally detaching the ten nuts securing the exhaust manifold. Check the exhaust manifold for indications of any physical problems. Metal scrapers and wire brushes and abrasive tools must always be replaced by plastic scraping tools to remove old sealant from sealing surfaces because these metal tools cause leaks through scratches and gouges. You need to use Motorcraft metal surface prep solution to clean each sealing surface following package guidance and throw away the previous exhaust manifold gaskets. Evacuate and remove the ten exhaust manifold-to-cylinder head studs from their surfaces. The first step of installation involves using ten new exhaust manifold-to-cylinder head studs before tightening them to 12 Nm (106 lb-in). After placing new exhaust manifold gaskets together with the exhaust manifold you must install ten new exhaust manifold nuts which require a torque of 25 Nm (18 lb-ft) according to a specific installation sequence. Two bolts should be used to secure the exhaust manifold heat shield and each bolt requires a torque specification of 14 Nm (124 lb-in). Fasten the four exhaust manifold-to-catalytic converter nuts at 40 Nm torque while using 30 lb-ft as a reference. The last step involves installing the right-hand inner fenderwell together with the starter and transmission filler tube when it was taken off.

OEM 2009 Ford F-250 Super Duty Exhaust Manifold

Engine Exhaust Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Exhaust Manifolds found

View related parts
2009 Ford F-250 Super Duty Exhaust Manifold, Passenger Side
Part Number: 9L3Z-9K494-A
$157.67 MSRP: $229.50
You Save: $71.83 (32%)
ADD TO CART
Product Specifications
- Other Name: Kit - Manifold And Gaskets; Exhaust Manifold, Right; Manifold
- Position: Passenger Side
- Replaces: 9L3Z-9430-D
- Base No.: 9430
- Item Weight: 14.60 Pounds
- Item Dimensions: 7.3 x 6.1 x 22.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L3Z-9K494-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, King Ranch, Lariat, XL, XLT | 8 Cyl 5.4 L GAS
View related parts
2009 Ford F-250 Super Duty Exhaust Manifold
Part Number: 8C3Z-9430-A
$194.27 MSRP: $302.60
You Save: $108.33 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Manifold
- Base No.: 9430
- Item Weight: 10.10 Pounds
- Item Dimensions: 9.5 x 5.4 x 22.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 8C3Z-9430-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 8 Cyl 6.4 L DIESEL
View related parts
2009 Ford F-250 Super Duty Exhaust Manifold, Driver Side
Part Number: 7C3Z-9431-B
$143.13 MSRP: $208.33
You Save: $65.20 (32%)
ADD TO CART
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Left; Manifold
- Position: Driver Side
- Replaces: 5C3Z-9431-BA
- Base No.: 9430B
- Item Weight: 13.60 Pounds
- Item Dimensions: 7.3 x 6.6 x 18.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7C3Z-9431-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, King Ranch, Lariat, XL, XLT | 8 Cyl 5.4 L GAS
View related parts
2009 Ford F-250 Super Duty Exhaust Manifold, Driver Side
Part Number: 7C3Z-9431-A
$780.75 MSRP: $1156.67
You Save: $375.92 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Left; Manifold
- Manufacturer Note: MANIFOLD, EXH LH
- Position: Driver Side
- Base No.: 9430
- Item Weight: 18.70 Pounds
- Item Dimensions: 24.7 x 9.8 x 7.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7C3Z-9431-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS
View related parts
2009 Ford F-250 Super Duty Exhaust Manifold, Passenger Side
Part Number: 7C3Z-9430-E
$728.70 MSRP: $1156.67
You Save: $427.97 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Right; Manifold
- Manufacturer Note: MANIFOLD, EXH RH
- Position: Passenger Side
- Replaces: CC3Z-9430-A, CC3Z-9430-B
- Base No.: 9430
- Item Weight: 19.40 Pounds
- Item Dimensions: 26.3 x 10.4 x 9.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7C3Z-9430-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS
View related parts
2009 Ford F-250 Super Duty Exhaust Manifold
Part Number: 7C3Z-9430-A
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Left, Right; Manifold
- Base No.: 9430
- Item Weight: 12.80 Pounds
- Item Dimensions: 25.1 x 9.2 x 7.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7C3Z-9430-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, King Ranch, Lariat, XL, XLT | 8 Cyl 5.4 L GAS

2009 Ford F-250 Super Duty Exhaust Manifold

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford F-250 Super Duty Exhaust Manifold available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford F-250 Super Duty Exhaust Manifold as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford F-250 Super Duty Exhaust Manifold Parts Questions & Experts Answers

Q: How to remove and replace the right-hand exhaust manifold on 2009 Ford F-250 Super Duty?
A: First set the transmission to neutral gear position and position the vehicle on a hoist before starting right-hand exhaust manifold replacement. Start by removing applicable components such as transmission filler tube then starter then the right-hand inner fenderwell. Start the exhaust replacement process by taking off four exhaust Y-pipe flange nuts before removing the two bolts that secure the exhaust manifold heat shield and finally detaching the ten nuts securing the exhaust manifold. Check the exhaust manifold for indications of any physical problems. Metal scrapers and wire brushes and abrasive tools must always be replaced by plastic scraping tools to remove old sealant from sealing surfaces because these metal tools cause leaks through scratches and gouges. You need to use Motorcraft metal surface prep solution to clean each sealing surface following package guidance and throw away the previous exhaust manifold gaskets. Evacuate and remove the ten exhaust manifold-to-cylinder head studs from their surfaces. The first step of installation involves using ten new exhaust manifold-to-cylinder head studs before tightening them to 12 Nm (106 lb-in). After placing new exhaust manifold gaskets together with the exhaust manifold you must install ten new exhaust manifold nuts which require a torque of 25 Nm (18 lb-ft) according to a specific installation sequence. Two bolts should be used to secure the exhaust manifold heat shield and each bolt requires a torque specification of 14 Nm (124 lb-in). Fasten the four exhaust manifold-to-catalytic converter nuts at 40 Nm torque while using 30 lb-ft as a reference. The last step involves installing the right-hand inner fenderwell together with the starter and transmission filler tube when it was taken off.

Related 2009 Ford F-250 Super Duty Parts

Alternate Year Models

2008 Ford F-250 Super Duty Exhaust Manifold 2010 Ford F-250 Super Duty Exhaust Manifold

OEM 2009 Ford F-250 Super Duty Exhaust Manifold

6 Exhaust Manifolds found

2009 Ford F-250 Super Duty Exhaust Manifold, Passenger Side Part Number: 9L3Z-9K494-A

2009 Ford F-250 Super Duty Exhaust Manifold Part Number: 8C3Z-9430-A

2009 Ford F-250 Super Duty Exhaust Manifold, Driver Side Part Number: 7C3Z-9431-B

2009 Ford F-250 Super Duty Exhaust Manifold, Driver Side Part Number: 7C3Z-9431-A

2009 Ford F-250 Super Duty Exhaust Manifold, Passenger Side Part Number: 7C3Z-9430-E

2009 Ford F-250 Super Duty Exhaust Manifold Part Number: 7C3Z-9430-A

2009 Ford F-250 Super Duty Exhaust Manifold

2009 Ford F-250 Super Duty Exhaust Manifold Parts Questions & Experts Answers

Related 2009 Ford F-250 Super Duty Parts

Alternate Year Models

2009 Ford F-250 Super Duty Exhaust Manifold, Passenger Side
Part Number: 9L3Z-9K494-A

2009 Ford F-250 Super Duty Exhaust Manifold
Part Number: 8C3Z-9430-A

2009 Ford F-250 Super Duty Exhaust Manifold, Driver Side
Part Number: 7C3Z-9431-B

2009 Ford F-250 Super Duty Exhaust Manifold, Driver Side
Part Number: 7C3Z-9431-A

2009 Ford F-250 Super Duty Exhaust Manifold, Passenger Side
Part Number: 7C3Z-9430-E

2009 Ford F-250 Super Duty Exhaust Manifold
Part Number: 7C3Z-9430-A