How to remove and install the pilot bearing in a transmission on 2009 Ford F-350 Super Duty?

Removal of the pilot bearing requires the removal of the clutch disc and pressure plate first. Take the Pilot Bearing Remover with Impact Slide Hammer and remove the bearing. Fit a new pregreased bearing using the soft-face hammer and the correct tool then fit the clutch disc and pressure plate back.

OEM 2009 Ford F-350 Super Duty Pilot Bearing

Clutch Pilot Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Pilot Bearing found

View related parts
2009 Ford F-350 Super Duty Pilot Bearing Part Number: 1C3Z-7600-AB
$16.63 MSRP: $24.20
You Save: $7.57 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing Assembly - Needle; Pilot Bearings
- Base No.: 7600
- Item Weight: 1.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1C3Z-7600-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford F-350 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS

2009 Ford F-350 Super Duty Pilot Bearing

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford F-350 Super Duty Pilot Bearing available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford F-350 Super Duty Pilot Bearing as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford F-350 Super Duty Pilot Bearing Parts Q&A

Q: How to remove and install the pilot bearing in a transmission on 2009 Ford F-350 Super Duty?
A: Removal of the pilot bearing requires the removal of the clutch disc and pressure plate first. Take the Pilot Bearing Remover with Impact Slide Hammer and remove the bearing. Fit a new pregreased bearing using the soft-face hammer and the correct tool then fit the clutch disc and pressure plate back.