FordParts
My Garage
My Account
Cart
OEM 2009 Ford Flex Fuel Level Sensor
Gas Gauge Sensor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Fuel Level Sensors found
2009 Ford Flex Fuel Pump, Driver Side Part Number: 8A4Z-9275-B
$205.44 MSRP: $349.09You Save: $143.65 (42%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Sender Assembly - Fuel Tank; Fuel Sending Unit; Fuel Level Sensor; Hanger Assembly.; Fuel Pump Assembly; Fuel Sender Unit
- Position: Driver Side
- Base No.: 9275
- Item Weight: 2.20 Pounds
- Item Dimensions: 14.1 x 7.9 x 12.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8A4Z-9275-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Flex Fuel Gauge Sending Unit, Passenger Side Part Number: 8A4Z-9A299-CA
$40.53 MSRP: $64.36You Save: $23.83 (38%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Sender Assembly - Fuel Tank; Fuel Tank Sending Unit, Right; Fuel Level Sensor; Fuel Sending Unit; Level Sensor; Sending Unit
- Manufacturer Note: Sender For 9H307 Fuel Pump
- Position: Passenger Side
- Base No.: 9A299
- Item Weight: 0.60 Pounds
- Item Dimensions: 10.3 x 3.0 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8A4Z-9A299-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Flex Fuel Gauge Sending Unit, Driver Side Part Number: 8A4Z-9A299-DA
$33.32 MSRP: $52.91You Save: $19.59 (38%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Sender Assembly - Fuel Tank; Left Fuel Sender and Hanger Assembly; Fuel Level Sensor; Level Sensor; Sending Unit
- Manufacturer Note: Sender For 9275 Fuel Pump
- Position: Driver Side
- Base No.: 9A299
- Item Weight: 0.50 Pounds
- Item Dimensions: 10.2 x 2.2 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8A4Z-9A299-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Flex Fuel Level Sensor
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Flex Fuel Level Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Flex Fuel Level Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Ford Flex Fuel Level Sensor Parts Q&A
- Q: How should one safely service the fuel level sensor on 2009 Ford Flex?A: The fuel level service requires safety precautions to keep away smoking or carrying lighted tobacco products or open flame sources from fuel-related components because dangerous fuel mixtures exist. Users must prevent the use of personal electronic devices in areas surrounding fuel components. The procedure to work on fuel tubes and system components requires relieving fuel system pressure first to avoid accidents and professionals should always disconnect the battery ground cable during evaporative emission system or fuel-related component maintenance. A serviceable fuel level sender exists within the fuel level sensor device. The starting point should consist of releasing fuel system pressure followed by disconnection of the battery ground cable. Open the fuel pump module access cover while you inspect and clean all module connections with no debris present inside the surrounding area. Use absorbent towelling around the working area before disconnecting the fuel pump module electrical connector. Route the fuel tank jumper tube to a fuel storage tanker which should drain about one-fourth of the fuel until the sensor mounting flange becomes exposed in the lowered fuel level. Access the sensor cover of the fuel level and cleanse its connections before disconnecting its electrical wires. Cut the connections of the fuel vapor tube assembly and fuel vapor tube from the fuel level sensor. You should use the Fuel Tank Sender Unit Wrench to safety remove the fuel lock ring of the sensor unit while protecting the sensor from any damage. Use a suitable container to drain fuel from the tank while you remove the lock ring then extract the fuel level sensor by disconnecting the internal fuel tube coupling. Clean engine oil should be applied to a new O-ring before its installation and the old O-ring seal needs to be removed and discarded. Reverse the uninstallation steps by placing a new lock ring and O-ring seal then align the fuel level sensor arrows on the fuel tank before you tighten the lock ring to the stop tabs.