FordParts
My Garage
My Account
Cart
OEM 2009 Ford Flex Fuel Pump
Gas Pump- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Fuel Pumps found
2009 Ford Flex Fuel Pump, Driver Side Part Number: 8A4Z-9275-B
$205.44 MSRP: $349.09You Save: $143.65 (42%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Sender Assembly - Fuel Tank; Fuel Sending Unit; Fuel Level Sensor; Hanger Assembly.; Fuel Pump Assembly; Fuel Sender Unit
- Position: Driver Side
- Base No.: 9275
- Item Weight: 2.20 Pounds
- Item Dimensions: 14.1 x 7.9 x 12.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8A4Z-9275-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Flex Fuel Pump, Passenger Side Part Number: 8A8Z-9H307-A
$340.55 MSRP: $565.45You Save: $224.90 (40%)Product Specifications- Other Name: Sender And Pump Assembly; Electric Fuel Pump, Right; Fuel Pump Module Assembly; Fuel Pump Assembly; Electric Fuel Pump
- Position: Passenger Side
- Base No.: 9H307
- Item Weight: 3.80 Pounds
- Item Dimensions: 10.2 x 14.2 x 18.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8A8Z-9H307-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Flex Fuel Pump
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Flex Fuel Pump available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Flex Fuel Pump as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Ford Flex Fuel Pump Parts Q&A
- Q: What safety precautions should be observed when servicing the fuel gauge sender and fuel pump module on 2009 Ford Flex?A: Safety procedures should be followed during fuel gauge sender and fuel pump module servicing operations because highly flammable mixtures exist in the range. The first steps involve decreasing fuel system pressure together with disconnecting the battery cable. The first task is to remove the fuel pump module access cover for cleaning the flange surfaces and couplings along with connections from all dirt. The fuel pump module electrical connector needs to be disconnected but you should place absorbent wicking near to collect any fuel leakage. After disconnecting the fuel tank jumper tube from the fuel pump module quick connect coupling you can attach a fuel storage tanker to remove about one-fourth of the fuel volume until the fuel level matches the pump module mounting flange height. The Fuel Tank Sender Unit Wrench must be used to remove the lock ring at which point discard it. Cautiously extract the fuel pump module from the fuel tank after disconnecting its internal fuel tube quick connect coupling. Drain the fuel from the container into an appropriate container before inspecting the damaged areas between the flange and O-ring contact surfaces of the module. Adjustments or surface polishing are strictly prohibited. Replacement of both the fuel pump module or fuel tank becomes necessary in case of damage. Place clean engine oil on the new O-ring seal while installing it with a new lock ring by aligning the arrows between the pump module and fuel tank before tightening the lock ring to rest against the fuel tank stop tabs.