Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2009 Ford Flex Parking Brake Cable

Emergency Parking Brake Release Cable
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Parking Brake Cables found

  • 2009 Ford Flex Parking Brake Cable - FB5Z-2853-A
    2009 Ford Flex Parking Brake Cable Diagram - FB5Z-2853-A
    View related parts

    2009 Ford Flex Front Cable Part Number: FB5Z-2853-A

    $47.40 MSRP: $75.27
    You Save: $27.87 (38%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Cable Assembly - Parking Brake; Brake Cable
    • Replaces: 8G1Z-2853-A, 9G1Z-2853-A, 9G1Z-2853-B
    • Base No.: 2853
    • Item Weight: 1.10 Pounds
    • Item Dimensions: 2.1 x 4.2 x 46.9 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: FB5Z-2853-A
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2009 Ford Flex Submodels:
    • Limited, SE, SEL, Titanium | 6 Cyl 3.5 L GAS
  • 2009 Ford Flex Parking Brake Cable - AE9Z-2A635-A
    2009 Ford Flex Parking Brake Cable Diagram - AE9Z-2A635-A
    View related parts

    2009 Ford Flex Rear Cable, Driver Side Part Number: AE9Z-2A635-A

    Product Specifications
    • Other Name: Cable Assembly - Parking Brake; Brake Cable
    • Position: Driver Side
    • Replaces: 8A8Z-2A635-C, 8A8Z-2A635-B
    • Base No.: 2A635
    • Item Weight: 3.10 Pounds
    • Item Dimensions: 11.0 x 6.3 x 25.3 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: AE9Z-2A635-A
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2009 Ford Flex Submodels:
    • Limited, SE, SEL, Titanium | 6 Cyl 3.5 L GAS
  • 2009 Ford Flex Parking Brake Cable - 8A8Z-2A635-A
    2009 Ford Flex Parking Brake Cable Diagram - 8A8Z-2A635-A
    View related parts

    2009 Ford Flex Rear Cable, Passenger Side Part Number: 8A8Z-2A635-A

    Product Specifications
    • Other Name: Cable Assembly - Parking Brake; Brake Cable
    • Position: Passenger Side
    • Base No.: 2A635
    • Item Weight: 4.30 Pounds
    • Item Dimensions: 11.1 x 6.1 x 25.6 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 8A8Z-2A635-A
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2009 Ford Flex Submodels:
    • Limited, SE, SEL, Titanium | 6 Cyl 3.5 L GAS

2009 Ford Flex Parking Brake Cable

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Flex Parking Brake Cable available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Flex Parking Brake Cable as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Flex Parking Brake Cable Parts Q&A

  • Q: How to remove and replace the rear parking brake cables on 2009 Ford Flex?
    A: The first step to uninstall and replace rear parking brake cables is releasing the tension on the parking brake cables. The right-hand (RH) cable may be removed by first Americanizing the cable-to-cable union followed by its separation from the left-hand (LH) cable at the conduit equalizer until the cable becomes free from the wireform bracket. The three parking brake cable bracket bolts can be removed at this stage after you tighten them to 15 Nm (133 lb-in) for installation. The RH wheel well bracket bolt needs removal while its final installation torque should be set to 23 Nm (17 lb-ft). Begin by disconnecting the conduit equalizer from the RH cable before using the screwdriver to remove the wireform bracket bolt and separate the LH cable with bracket from the RH cable. The bolt needs to be tightened to 12 Nm (106 lb-in) upon replacement. A 23 Nm (17 lb-ft) torque value should be applied to the LH wheel well bracket bolt when reinstalling because it needs to be tightened to this specifications. You should finish uninstallation by freeing both parking brake cables from their position on the brake caliper and then removing them. The installation procedure will be the reverse of removal while a proper inspection of the parking brake system must be performed to ensure correct function.

Related 2009 Ford Flex Parts

Alternate Year Models

+
2010 Ford Flex Parking Brake Cable