How to Service and Repair the Motor and Transmission Mount for the 4F27E Transmission on 2009 Ford Focus?

A proper repair and servicing process for the 4F27E transmission's transaxle support insulator begins with removing the battery tray followed by disconnecting its wiring harness fasteners and removing the tray after putting the battery aside. You must first install the Engine Support Bar alongside its adapters to support the engine followed by removing the transaxle support bolt and nuts for extracting the transaxle support insulator. Start by installing the transaxle support insulator nuts then fasten the four support insulator-to-body nuts until they reach 48 Nm (35 lb-ft) torque. You should now install the support insulator-to-bracket nut before securing it at 150 Nm (111 lb-ft). The installation process requires removing both the Engine Support Bar and Adapters, moving the battery tray into position and fixing the four wiring harness retainers. Position the battery tray onto the studs then fasten it through the three battery tray nuts before tightening them to 12 Nm (106 lb-in), and complete the process by reinstalling the battery.

OEM 2009 Ford Focus Motor And Transmission Mount

Motor and Trans Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Motor And Transmission Mounts found

View related parts
2009 Ford Focus Transmission Mount
Part Number: 8S4Z-6068-A
$51.21 MSRP: $73.27
You Save: $22.06 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Housing; Transfer Case Mount; Lower Trans Mount
- Base No.: 6068
- Item Weight: 1.80 Pounds
- Item Dimensions: 8.1 x 4.5 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8S4Z-6068-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Focus Submodels:
- S, SE, SEL, SES | 4 Cyl 2.0 L GAS
View related parts
2009 Ford Focus Motor Mount
Part Number: 5S4Z-6038-BB
$68.68 MSRP: $99.97
You Save: $31.29 (32%)
ADD TO CART
Product Specifications
- Other Name: Bracket - Insulator Mounting; Engine Mount; Engine Mount Torque Strut; Engine Mount Bracket; Engine Mount Bushing; Front Insulator; Mount
- Manufacturer Note: For Warm Climates Only
- Replaces: 5S4Z-6038-BA
- Base No.: 6038
- Item Weight: 2.20 Pounds
- Item Dimensions: 11.2 x 11.3 x 9.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5S4Z-6038-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Focus Submodels:
- S, SE, SEL, SES, ZX3, ZX4, ZX5, ZXW | 4 Cyl 2.0 L GAS
View related parts
2009 Ford Focus Motor Mount
Part Number: 5S4Z-6038-CB
$57.11 MSRP: $83.13
You Save: $26.02 (32%)
ADD TO CART
Product Specifications
- Other Name: Bracket - Insulator Mounting; Engine Mount; Engine Mount Bracket; Engine Mount Bushing; Mount
- Manufacturer Note: For Warm Climates Only
- Replaces: 5S4Z-6038-CA
- Base No.: 6038
- Item Weight: 7.40 Pounds
- Item Dimensions: 9.3 x 9.2 x 7.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5S4Z-6038-CB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Focus Submodels:
- S, SE, SEL, SES, ZX3, ZX4, ZX5, ZXW | 4 Cyl 2.0 L GAS
View related parts
2009 Ford Focus Mount Bracket
Part Number: 8S4Z-6A036-A
$3.71 MSRP: $5.13
You Save: $1.42 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mounting; Bumper Cover Reinforcement
- Base No.: 6A036
- Item Weight: 0.70 Pounds
- Item Dimensions: 6.3 x 5.2 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8S4Z-6A036-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Focus Submodels:
- S, SE, SEL, SES | 4 Cyl 2.0 L GAS
View related parts
2009 Ford Focus Transmission Mount
Part Number: 8S4Z-6068-B
Product Specifications
- Other Name: Housing; Transfer Case Mount; Lower Trans Mount
- Base No.: 6068
- Item Weight: 1.80 Pounds
- Item Dimensions: 6.6 x 4.0 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8S4Z-6068-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Focus Submodels:
- S, SE, SEL, SES | 4 Cyl 2.0 L GAS

2009 Ford Focus Motor And Transmission Mount

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Focus Motor And Transmission Mount available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Focus Motor And Transmission Mount as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Focus Motor And Transmission Mount Parts Questions & Experts Answers

Q: How to Service and Repair the Motor and Transmission Mount for the 4F27E Transmission on 2009 Ford Focus?
A: A proper repair and servicing process for the 4F27E transmission's transaxle support insulator begins with removing the battery tray followed by disconnecting its wiring harness fasteners and removing the tray after putting the battery aside. You must first install the Engine Support Bar alongside its adapters to support the engine followed by removing the transaxle support bolt and nuts for extracting the transaxle support insulator. Start by installing the transaxle support insulator nuts then fasten the four support insulator-to-body nuts until they reach 48 Nm (35 lb-ft) torque. You should now install the support insulator-to-bracket nut before securing it at 150 Nm (111 lb-ft). The installation process requires removing both the Engine Support Bar and Adapters, moving the battery tray into position and fixing the four wiring harness retainers. Position the battery tray onto the studs then fasten it through the three battery tray nuts before tightening them to 12 Nm (106 lb-in), and complete the process by reinstalling the battery.