How to remove and replace the engine mount on 2009 Ford Focus?

Start by tightening the two coolant expansion tank bolts to 4 Nm (35 lb-in) before replacing them after replacement. Afterward elevate the coolant expansion tank from the engine mount stud bolt before placing it in a safe location. Proceed with installing the Engine Support Bar before removing the two engine mount nuts that should be tightened to 90 Nm (66 lb-ft). The process requires removing the two bolts and stud bolt and engine mount before tightening the new mount to 48 Nm (35 lb-ft). Following the removal sequence reinstall the components to finish the installation process.

OEM 2009 Ford Focus Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Engine Mounts found

View related parts
2009 Ford Focus Transmission Mount
Part Number: 8S4Z-6068-A
$51.21 MSRP: $73.27
You Save: $22.06 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Housing; Transfer Case Mount; Lower Trans Mount
- Base No.: 6068
- Item Weight: 1.80 Pounds
- Item Dimensions: 8.1 x 4.5 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8S4Z-6068-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Focus Submodels:
- S, SE, SEL, SES | 4 Cyl 2.0 L GAS
View related parts
2009 Ford Focus Motor Mount
Part Number: 5S4Z-6038-BB
$68.68 MSRP: $99.97
You Save: $31.29 (32%)
ADD TO CART
Product Specifications
- Other Name: Bracket - Insulator Mounting; Engine Mount; Engine Mount Torque Strut; Engine Mount Bracket; Engine Mount Bushing; Front Insulator; Mount
- Manufacturer Note: For Warm Climates Only
- Replaces: 5S4Z-6038-BA
- Base No.: 6038
- Item Weight: 2.20 Pounds
- Item Dimensions: 11.2 x 11.3 x 9.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5S4Z-6038-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Focus Submodels:
- S, SE, SEL, SES, ZX3, ZX4, ZX5, ZXW | 4 Cyl 2.0 L GAS
View related parts
2009 Ford Focus Motor Mount
Part Number: 5S4Z-6038-CB
$57.11 MSRP: $83.13
You Save: $26.02 (32%)
ADD TO CART
Product Specifications
- Other Name: Bracket - Insulator Mounting; Engine Mount; Engine Mount Bracket; Engine Mount Bushing; Mount
- Manufacturer Note: For Warm Climates Only
- Replaces: 5S4Z-6038-CA
- Base No.: 6038
- Item Weight: 7.40 Pounds
- Item Dimensions: 9.3 x 9.2 x 7.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5S4Z-6038-CB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Focus Submodels:
- S, SE, SEL, SES, ZX3, ZX4, ZX5, ZXW | 4 Cyl 2.0 L GAS
View related parts
2009 Ford Focus Transmission Mount
Part Number: 8S4Z-6068-B
Product Specifications
- Other Name: Housing; Transfer Case Mount; Lower Trans Mount
- Base No.: 6068
- Item Weight: 1.80 Pounds
- Item Dimensions: 6.6 x 4.0 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8S4Z-6068-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Focus Submodels:
- S, SE, SEL, SES | 4 Cyl 2.0 L GAS

2009 Ford Focus Engine Mount

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Focus Engine Mount available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Focus Engine Mount as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Focus Engine Mount Parts Questions & Experts Answers

Q: How to remove and replace the engine mount on 2009 Ford Focus?
A: Start by tightening the two coolant expansion tank bolts to 4 Nm (35 lb-in) before replacing them after replacement. Afterward elevate the coolant expansion tank from the engine mount stud bolt before placing it in a safe location. Proceed with installing the Engine Support Bar before removing the two engine mount nuts that should be tightened to 90 Nm (66 lb-ft). The process requires removing the two bolts and stud bolt and engine mount before tightening the new mount to 48 Nm (35 lb-ft). Following the removal sequence reinstall the components to finish the installation process.