How to remove and replace the front shock absorber and spring assembly on Ford Fusion?

You must start the front shock absorber and spring assembly replacement by removing the three upper mount nuts on the discarding step and using an exact replacement part with the same part number because suspension fasteners determine both vehicle performance and safety. Twenty metric units of torque (22 foot-pounds) should be applied for tightening the new nuts. Install the vehicle onto a hoist in neutral position before you remove the brake line bracket bolt and place the brake line securely out of the way. Reinstall this line and secure it with 23 Nm (17 ft. lbs. of torque). During wheel speed sensor bolt and harness bolt removal keep the sensor on a safe side and reinstall them by tightening both bolts to 23 Nm (17 ft. lbs.). A proper jack supports the wheel knuckle at its lower ball joints before you uninstall the stabilizer bar link upper nut. The new nut requires a torque of 40 Nm (30 ft. lbs.) when you reinstall it. The procedure then necessitates shock absorber lower bolt and flag nut removal along with damper removal before discarding the bolts and flag nuts and installing the new bolt to 103 Nm (76 ft. lbs.) torque while the suspension remains at bushing fastener tightening position. While disassembling the shock absorber from the damper fork you must remove its bolt which we should tighten to 48 Nm (35 ft. lbs.) during final reassembly. Lower the wheel knuckle to access the shock absorber with its spring assembly. The suspension needs to be lifted by a suitable jack until the center of the hub stands 15.83 inches (402 mm) from the fender lip to proceed with bushing fastener torque adjustments. The reverse installation procedure should complete the replacement of the new assembly.

How to service and repair the shock absorber on front wheel drive (FWD) and all wheel drive (AWD) on Ford Fusion?

Start the repaire of FWD and AWD shock absorbers by first removing the upper arm. The shock absorber needs compressing before tying it down with straps in this position. Once the brackets holding three shock absorber bolts are removed you can take out the shock absorber unit together with its upper bracket. Discard all bolts from service. At first mark the shock absorber position to the bracket then remove the upper shock absorber bolt and nut and bracket component from the assembly. Rephrase the index mark from the original shock absorber onto the newly installed one. Install the new shock absorber upper bolt and nut in a loose state but do not complete the tightening procedure yet. Tighten the upper nut by maintaining the shock absorber's current angle to the bracket and while doing so ensure the index marks are positioned correctly to reach a 118-degree alignment with the bracket's alignment tab. Torque tightness for the upper nut must be set at 90 Nm (66 lb-ft) on AWD vehicles whereas FWD vehicles require 103 Nm (76 lb-ft). Position the shock absorber and its bracket before installing their three mounting bolts and setting torque to 40 Nm (30 lb-ft). Finally, reinstall the upper arm.

OEM Ford Fusion Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

43 Shock Absorbers found

View related parts
Ford Fusion Shock Absorber, Rear Part Number: EG9Z-18125-D
$179.19 MSRP: $289.09
You Save: $109.90 (39%)
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly; Suspension Shock Absorber, Rear Left, Rear Right; Shock
- Manufacturer Note: (RH)
- Position: Rear
- Replaces: ASH-24587, DG9Z-18125-A, ASH-24513, EG9Z-18125-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2016 Ford Fusion | S, SE, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Ford Fusion Shock Absorber, Rear Part Number: 6E5Z-18125-BA
$68.29 MSRP: $112.36
You Save: $44.07 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly; Rear Suspension Shock Absorber Kit; Complete Strut Assembly.; Shock; Suspension Shock Absorber
- Position: Rear
- Replaces: 7E5Z-18125-A, AE5Z-18125-C, ASH-431, ASH-440, 6E5Z-18125-AA, AST-281, AST-338, 8E5Z-18125-A, AST-177, ASH-421, AE5Z-18125-D, AE5Z-18125-B, ASH-432, AE5Z-18125-G, AST-283, AE5Z-18125-E, ASH-424, AE5Z-18125-A, 7H6Z-18125-C, AST-179, AE5Z-18125-F, AH6Z-18125-A, 6H6Z-18125-AA, ASH-420, 7H6Z-18125-D, ASH-423, ASH-422, AST-282, ASH-425, AH6Z-18125-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2012 Ford Fusion | Hybrid, S, SE, SEL, Sport | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford Fusion Strut, Front Passenger Side Part Number: EG9Z-18124-J
$204.77 MSRP: $340.00
You Save: $135.23 (40%)
ADD TO CART
Product Specifications
- Other Name: Strut - Suspension; Suspension Strut, Front Right
- Position: Front Passenger Side
- Replaces: AST-12279, DG9Z-18124-U, DG9Z-18124-A, AST-24731, AST-18186, AST-12368, EG9Z-18124-C, EG9Z-18124-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2016 Ford Fusion | S, SE, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Ford Fusion Strut, Front Driver Side Part Number: EG9Z-18124-K
$196.01 MSRP: $325.45
You Save: $129.44 (40%)
ADD TO CART
Product Specifications
- Other Name: Strut - Suspension; Suspension Strut, Front Left
- Position: Front Driver Side
- Replaces: AST-12280, AST-12369, AST-24732, EG9Z-18124-D, EG9Z-18124-B, DG9Z-18124-B, DG9Z-18124-V, AST-18187
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2016 Ford Fusion | S, SE, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Ford Fusion Strut, Front Passenger Side Part Number: 7E5Z-18124-RH
$70.50 MSRP: $116.00
You Save: $45.50 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Kit - Shock Absorber; Front Right Suspension Strut Assembly; Complete Strut Kit.; Shock Absorber; Shock
- Position: Front Passenger Side
- Replaces: 6H6Z-18124-AR, 6E5Z-18124-BR, AST-163, 7H6Z-18124-RL, AST-337, AST-164, 8H6Z-18124-A, 8E5Z-18124-R, AST-162, AST-279, AST-388, 6E5Z-18124-AR
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2012 Ford Fusion | S, SE, SEL, Sport | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford Fusion Strut, Front Driver Side Part Number: 7E5Z-18124-LH
$75.59 MSRP: $126.91
You Save: $51.32 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Kit - Shock Absorber; Front Left Suspension Strut Assembly; Complete Strut Set.; Shock Absorber; Shock
- Position: Front Driver Side
- Replaces: 6H6Z-18124-AL, 6E5Z-18124-AL, 8E5Z-18124-L, AST-159, AST-160, AST-336, 8H6Z-18124-B, 6E5Z-18124-BL, AST-389, AST-161, AST-280, 7H6Z-18124-LH
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2012 Ford Fusion | S, SE, SEL | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
View related parts
Ford Fusion Shock Absorber, Rear Part Number: DG9Z-18125-V
$81.88 MSRP: $134.73
You Save: $52.85 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly; Rear Suspension Strut Kit; Complete Strut; Shock; Suspension Shock Absorber
- Position: Rear
- Replaces: DG9Z-18125-Q, ASH-24578
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2014-2016 Ford Fusion | Energi SE, Energi Titanium, S, S Hybrid, SE, SE Hybrid, Titanium, Titanium Hybrid | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.5 L GAS
View related parts
Ford Fusion Strut, Front Driver Side Part Number: AH6Z-18124-D
$92.49 MSRP: $152.18
You Save: $59.69 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly - Front; Front Left Strut; Shock Absorber Kit; Set; Shock Absorber
- Position: Front Driver Side
- Replaces: AST-421, AE5Z-18124-D, AE5Z-18124-B, AE5Z-18124-K, AST-471, AST-425, AE5Z-18124-F, AE5Z-18124-H, AST-423, AH6Z-18124-B, AST-427, AST-439
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Ford Fusion | Hybrid, S, SE, SEL, Sport | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Fusion Strut, Passenger Side Part Number: HG9Z-18124-E
$237.62 MSRP: $394.55
You Save: $156.93 (40%)
ADD TO CART
Product Specifications
- Other Name: Strut - Suspension
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2020 Ford Fusion | Platinum, S, SE, SEL, Sport, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
View related parts
Ford Fusion Shock Absorber, Rear Driver Side Part Number: HG9Z-18125-D
$198.20 MSRP: $329.09
You Save: $130.89 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly; Suspension Shock Absorber, Rear Left; Shock
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2020 Ford Fusion | Platinum, S, SE, SEL, Sport, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
View related parts
Ford Fusion Strut, Front Passenger Side Part Number: HG9Z-18124-B
$249.66 MSRP: $414.55
You Save: $164.89 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut - Suspension; Suspension Strut, Front Right
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2020 Ford Fusion | Platinum, S, SE, SEL, Sport, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
View related parts
Ford Fusion Strut, Front Driver Side Part Number: HG9Z-18124-C
$240.90 MSRP: $400.00
You Save: $159.10 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut - Suspension; Suspension Strut, Front Left
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2020 Ford Fusion | Platinum, S, SE, SEL, Sport, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
View related parts
Ford Fusion Shock Absorber, Rear Part Number: HG9Z-18125-AF
$78.34 MSRP: $128.91
You Save: $50.57 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly; Shock Absorber, Rear; Suspension Shock Absorber; Shock
- Position: Rear
- Replaces: ASH-25816, HG9Z-18125-N
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2020 Ford Fusion | Platinum, S, SE, SEL, Sport, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
View related parts
Ford Fusion Strut, Front Driver Side Part Number: DG9Z-18124-Q
$140.34 MSRP: $230.91
You Save: $90.57 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly - Front; Front Left Suspension Strut Kit; Complete Strut
- Position: Front Driver Side
- Replaces: AST-12284, DG9Z-18124-E, DG9Z-18124-L, AST-12360
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2016 Ford Fusion | S, SE, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Ford Fusion Strut, Front Passenger Side Part Number: DG9Z-18124-T
$130.39 MSRP: $214.55
You Save: $84.16 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly; Front Right Suspension Strut Kit; Complete Strut
- Position: Front Passenger Side
- Replaces: AST-12361, AST-12290, DG9Z-18124-M, DG9Z-18124-J
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2016 Ford Fusion | S, SE, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Ford Fusion Strut, Passenger Side Part Number: HG9Z-18124-N
$131.50 MSRP: $216.36
You Save: $84.86 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2020 Ford Fusion | Platinum, S, SE, SEL, Sport, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
View related parts
Ford Fusion Shock Absorber Part Number: HG9Z-18125-K
$114.92 MSRP: $189.09
You Save: $74.17 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly; Shock
- Manufacturer Note: RH/LH
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2020 Ford Fusion | Platinum, S, SE, SEL, Sport, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
View related parts
Ford Fusion Shock Absorber, Rear Driver Side Part Number: HG9Z-18125-E
$202.58 MSRP: $336.36
You Save: $133.78 (40%)
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly; Shock Absorber, Rear Left; Shock
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2020 Ford Fusion | Platinum, S, SE, SEL, Sport, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
View related parts
Ford Fusion Shock Absorber, Rear Part Number: HG9Z-18125-AE
$75.25 MSRP: $123.82
You Save: $48.57 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly; Shock Absorber, Rear; Suspension Shock Absorber; Shock
- Position: Rear
- Replaces: HG9Z-18125-P, ASH-25818
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2020 Ford Fusion | Platinum, S, SE, SEL, Sport, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
View related parts
Ford Fusion Shock Absorber, Rear Part Number: HG9Z-18125-H
$112.63 MSRP: $189.09
You Save: $76.46 (41%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly; Shock Absorber, Rear; Suspension Strut Assembly Kit; Suspension Shock Absorber; Complete Strut; Shock
- Manufacturer Note: RH/LH
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2020 Ford Fusion | Platinum, S, SE, SEL, Sport, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS

| Page 1 of 3 |Next >

1-20 of 43 Results

Ford Fusion Shock Absorber

OEM Shock Absorber boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Shock Absorber with long life and a perfect fit. Come to our website and find genuine Ford Fusion parts. We keep a wide inventory of OEM Fusion parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Shock Absorber on Ford Fusion automobiles is very essential in the suspension system to be used together with the struts for enhanced stability and control. The Shock Absorber changes the kinetic energy to heat hence minimizing the bouncing and absorbing shock impulses to enhance the quality and stability of your ride. In the course of several years of production, shock absorbers used in Ford Fusion vehicles are of twin-tube and mono-tube types where controls hydraulic fluid flow in different ways to provide better performance when driving. Special variants of it are PSD (Position Sensitive Damping) and ASD (Acceleration Sensitive Damping) that makes further sophistication of Shock Absorber's responses possible, technology like electrorheological and magnetorheological dampers for semi-active and adaptive suspension systems for boosting its comfort as well as control capabilities.

Ford Fusion Shock Absorber Parts and Q&A

Strut, Front Driver Side
7E5Z-18124-LH
Q: How to remove and replace the front shock absorber and spring assembly on Ford Fusion?
A:
You must start the front shock absorber and spring assembly replacement by removing the three upper mount nuts on the discarding step and using an exact replacement part with the same part number because suspension fasteners determine both vehicle performance and safety. Twenty metric units of torque (22 foot-pounds) should be applied for tightening the new nuts. Install the vehicle onto a hoist in neutral position before you remove the brake line bracket bolt and place the brake line securely out of the way. Reinstall this line and secure it with 23 Nm (17 ft. lbs. of torque). During wheel speed sensor bolt and harness bolt removal keep the sensor on a safe side and reinstall them by tightening both bolts to 23 Nm (17 ft. lbs.). A proper jack supports the wheel knuckle at its lower ball joints before you uninstall the stabilizer bar link upper nut. The new nut requires a torque of 40 Nm (30 ft. lbs.) when you reinstall it. The procedure then necessitates shock absorber lower bolt and flag nut removal along with damper removal before discarding the bolts and flag nuts and installing the new bolt to 103 Nm (76 ft. lbs.) torque while the suspension remains at bushing fastener tightening position. While disassembling the shock absorber from the damper fork you must remove its bolt which we should tighten to 48 Nm (35 ft. lbs.) during final reassembly. Lower the wheel knuckle to access the shock absorber with its spring assembly. The suspension needs to be lifted by a suitable jack until the center of the hub stands 15.83 inches (402 mm) from the fender lip to proceed with bushing fastener torque adjustments. The reverse installation procedure should complete the replacement of the new assembly.
Strut, Front Passenger Side
7E5Z-18124-RH
Q: How to service and repair the shock absorber on front wheel drive (FWD) and all wheel drive (AWD) on Ford Fusion?
A:
Start the repaire of FWD and AWD shock absorbers by first removing the upper arm. The shock absorber needs compressing before tying it down with straps in this position. Once the brackets holding three shock absorber bolts are removed you can take out the shock absorber unit together with its upper bracket. Discard all bolts from service. At first mark the shock absorber position to the bracket then remove the upper shock absorber bolt and nut and bracket component from the assembly. Rephrase the index mark from the original shock absorber onto the newly installed one. Install the new shock absorber upper bolt and nut in a loose state but do not complete the tightening procedure yet. Tighten the upper nut by maintaining the shock absorber's current angle to the bracket and while doing so ensure the index marks are positioned correctly to reach a 118-degree alignment with the bracket's alignment tab. Torque tightness for the upper nut must be set at 90 Nm (66 lb-ft) on AWD vehicles whereas FWD vehicles require 103 Nm (76 lb-ft). Position the shock absorber and its bracket before installing their three mounting bolts and setting torque to 40 Nm (30 lb-ft). Finally, reinstall the upper arm.