FordParts
My Garage
My Account
Cart
OEM 2009 Ford Fusion Water Pump
H2O Pump- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Water Pumps found
2009 Ford Fusion Water Pump Part Number: EU2Z-8501-D
$135.24 MSRP: $218.18You Save: $82.94 (39%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Pump Assembly - Water; Engine Water Pump; Water Pump Assembly
- Replaces: 3M4Z-8501-BG, 5M8Z-8501-A, 3M4Z-8501-BJ, 5M8Z-8501-B, PW-481, PW-437, PW-440
- Base No.: 8501
- Item Weight: 3.20 Pounds
- Item Dimensions: 5.4 x 6.3 x 9.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: EU2Z-8501-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Fusion Water Pump Part Number: 4S4Z-8501-E
$49.92 MSRP: $79.27You Save: $29.35 (38%)Ships in 1 Business DayProduct Specifications- Other Name: Pump Assembly - Water; Engine Water Pump; Water Pump Assembly
- Replaces: 6M8Z-8501-AC, PW-447, 1S7Z-8501-AK, 4S4Z-8501-AA, 4S4Z-8501-D, PW-465
- Item Weight: 2.00 Pounds
- Item Dimensions: 6.3 x 6.2 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4S4Z-8501-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Fusion Water Pump
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Fusion Water Pump available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Fusion Water Pump as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Ford Fusion Water Pump Parts Q&A
- Q: How to service the Water Pump on a 2.3L engine on 2009 Ford Fusion?A: The service of a 2.3L coolant pump begins by hoisting the vehicle in neutral position and draining its cooling system. The service requires separating the accessory drive belt and coolant pump pulley through removing the three bolts securing each one. The new pulley bolts need to be tightened at a torque value of 20 Nm (177 lb-in). The correct positioning of the coolant pump on the engine block is essential to avoid damage before installing fasteners. After proper seating, remove the three bolts together with the coolant pump and discard the ancient O-ring seal. Before attaching the new coolant pump apply engine coolant on the seal O-ring and fasten the bolts to 10 Nm torque (89 lb-in). Complete the cooling system filling process while performing a bleeding operation.