How to remove and replace the left-hand exhaust manifold on 2009 Ford Mustang?

The left-hand exhaust manifold replacement process starts with placing the vehicle in neutral gear on a hoist. Start by taking out the two nuts which fasten the catalytic converter to the exhaust manifold then dispose of them. You must disconnect the EGR system module tube from the exhaust manifold before moving on to remove six left-hand exhaust manifold nuts with their accompanying gasket. Discard all parts during removal. An inspection and cleaning process must be performed on the left-hand exhaust manifold before removing and discarding its six left-hand exhaust manifold studs. First apply six new left-hand exhaust manifold studs before tightening them to a torque of 12 Nm (106 lb-in). Install the new left-hand exhaust manifold gasket together with manifold in position by using six new nuts which should be tightened to 23 Nm (17 lb-ft). Attach the EGR system module tube to the exhaust manifold with a torque of 40 Nm (30 lb-ft) and use two new catalytic converter-to-exhaust manifold nuts secured at 45 Nm (33 lb-ft).

OEM 2009 Ford Mustang Exhaust Manifold

Engine Exhaust Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Exhaust Manifolds found

View related parts
2009 Ford Mustang Exhaust Manifold, Driver Side
Part Number: 7R3Z-9431-AA
$144.27 MSRP: $210.00
You Save: $65.73 (32%)
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Left
- Position: Driver Side
- Base No.: 9430B
- Item Weight: 11.30 Pounds
- Item Dimensions: 17.3 x 10.2 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7R3Z-9431-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Mustang Submodels:
- Shelby GT500, Shelby GT500KR | 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
View related parts
2009 Ford Mustang Exhaust Manifold, Passenger Side
Part Number: 7R3Z-9430-AA
$144.27 MSRP: $210.00
You Save: $65.73 (32%)
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Right
- Position: Passenger Side
- Base No.: 9430A
- Item Weight: 10.30 Pounds
- Item Dimensions: 16.7 x 9.9 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7R3Z-9430-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Mustang Submodels:
- Shelby GT500, Shelby GT500KR | 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
View related parts
2009 Ford Mustang Exhaust Manifold, Driver Side
Part Number: 5R3Z-9431-BA
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Left
- Position: Driver Side
- Base No.: 9430B
- Item Weight: 11.00 Pounds
- Item Dimensions: 17.0 x 10.2 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5R3Z-9431-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Mustang Submodels:
- Base | 6 Cyl 4.0 L GAS
View related parts
2009 Ford Mustang Exhaust Manifold, Passenger Side
Part Number: 5R3Z-9430-BA
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Right
- Position: Passenger Side
- Base No.: 9430A
- Item Weight: 10.30 Pounds
- Item Dimensions: 10.0 x 5.5 x 22.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5R3Z-9430-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Mustang Submodels:
- Base | 6 Cyl 4.0 L GAS
View related parts
2009 Ford Mustang Exhaust Manifold, Driver Side
Part Number: 4R3Z-9431-CA
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Left
- Position: Driver Side
- Base No.: 9430B
- Item Weight: 13.60 Pounds
- Item Dimensions: 22.4 x 7.4 x 7.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4R3Z-9431-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Mustang Submodels:
- Bullitt, GT, Shelby GT | 8 Cyl 4.6 L GAS
View related parts
2009 Ford Mustang Exhaust Manifold, Passenger Side
Part Number: 4R3Z-9430-CA
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Right
- Position: Passenger Side
- Base No.: 9430A
- Item Weight: 13.20 Pounds
- Item Dimensions: 16.8 x 10.3 x 6.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4R3Z-9430-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Mustang Submodels:
- Bullitt, GT, Shelby GT | 8 Cyl 4.6 L GAS

2009 Ford Mustang Exhaust Manifold

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Mustang Exhaust Manifold available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Mustang Exhaust Manifold as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Mustang Exhaust Manifold Parts Questions & Experts Answers

Q: How to remove and replace the left-hand exhaust manifold on 2009 Ford Mustang?
A: The left-hand exhaust manifold replacement process starts with placing the vehicle in neutral gear on a hoist. Start by taking out the two nuts which fasten the catalytic converter to the exhaust manifold then dispose of them. You must disconnect the EGR system module tube from the exhaust manifold before moving on to remove six left-hand exhaust manifold nuts with their accompanying gasket. Discard all parts during removal. An inspection and cleaning process must be performed on the left-hand exhaust manifold before removing and discarding its six left-hand exhaust manifold studs. First apply six new left-hand exhaust manifold studs before tightening them to a torque of 12 Nm (106 lb-in). Install the new left-hand exhaust manifold gasket together with manifold in position by using six new nuts which should be tightened to 23 Nm (17 lb-ft). Attach the EGR system module tube to the exhaust manifold with a torque of 40 Nm (30 lb-ft) and use two new catalytic converter-to-exhaust manifold nuts secured at 45 Nm (33 lb-ft).