How to service the left-hand exhaust manifold on 2008 Ford Mustang?

Service of the left-hand exhaust manifold begins with hoisting the vehicle into position while keeping it in neutral gear. The two catalytic converter-to-exhaust manifold nuts require removal before discarding them. The technician should disconnect the EGR system module tube from the exhaust manifold followed by removing six left-hand exhaust manifold nuts and the attached gasket and nuts. Begin by cleanup of the left-hand exhaust manifold and an inspection. Then proceed to remove the six left-hand exhaust manifold studs that need disposal. Six new left-hand exhaust manifold studs need installation first before torquing them to 12 Nm (9 lb-ft). Install the new left-hand exhaust manifold gasket and manifold by using six new nuts that should be tightened to 23 Nm (17 lb-ft). Connect the EGR system module tube to the exhaust manifold while tightening it to 39 Nm (29 lb-ft). Continue by installing two brand new catalytic converter-to-exhaust manifold nuts which need to be tightened to 45 Nm (33 lb-ft).

OEM 2008 Ford Mustang Exhaust Manifold

Engine Exhaust Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Exhaust Manifolds found

View related parts
2008 Ford Mustang Exhaust Manifold, Driver Side
Part Number: 7R3Z-9431-AA
$144.27 MSRP: $210.00
You Save: $65.73 (32%)
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Left
- Position: Driver Side
- Base No.: 9430B
- Item Weight: 11.30 Pounds
- Item Dimensions: 17.3 x 10.2 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7R3Z-9431-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Mustang Submodels:
- Shelby GT500, Shelby GT500KR | 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
View related parts
2008 Ford Mustang Exhaust Manifold, Passenger Side
Part Number: 7R3Z-9430-AA
$144.27 MSRP: $210.00
You Save: $65.73 (32%)
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Right
- Position: Passenger Side
- Base No.: 9430A
- Item Weight: 10.30 Pounds
- Item Dimensions: 16.7 x 9.9 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7R3Z-9430-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Mustang Submodels:
- Shelby GT500, Shelby GT500KR | 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
View related parts
2008 Ford Mustang Exhaust Manifold, Driver Side
Part Number: 5R3Z-9431-BA
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Left
- Position: Driver Side
- Base No.: 9430B
- Item Weight: 11.00 Pounds
- Item Dimensions: 17.0 x 10.2 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5R3Z-9431-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Mustang Submodels:
- Base | 6 Cyl 4.0 L GAS
View related parts
2008 Ford Mustang Exhaust Manifold, Passenger Side
Part Number: 5R3Z-9430-BA
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Right
- Position: Passenger Side
- Base No.: 9430A
- Item Weight: 10.30 Pounds
- Item Dimensions: 10.0 x 5.5 x 22.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5R3Z-9430-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Mustang Submodels:
- Base | 6 Cyl 4.0 L GAS
View related parts
2008 Ford Mustang Exhaust Manifold, Driver Side
Part Number: 4R3Z-9431-CA
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Left
- Position: Driver Side
- Base No.: 9430B
- Item Weight: 13.60 Pounds
- Item Dimensions: 22.4 x 7.4 x 7.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4R3Z-9431-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Mustang Submodels:
- Bullitt, GT, Shelby GT | 8 Cyl 4.6 L GAS
View related parts
2008 Ford Mustang Exhaust Manifold, Passenger Side
Part Number: 4R3Z-9430-CA
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Right
- Position: Passenger Side
- Base No.: 9430A
- Item Weight: 13.20 Pounds
- Item Dimensions: 16.8 x 10.3 x 6.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4R3Z-9430-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Mustang Submodels:
- Bullitt, GT, Shelby GT | 8 Cyl 4.6 L GAS

2008 Ford Mustang Exhaust Manifold

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Mustang Exhaust Manifold available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Mustang Exhaust Manifold as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford Mustang Exhaust Manifold Parts Questions & Experts Answers

Q: How to service the left-hand exhaust manifold on 2008 Ford Mustang?
A: Service of the left-hand exhaust manifold begins with hoisting the vehicle into position while keeping it in neutral gear. The two catalytic converter-to-exhaust manifold nuts require removal before discarding them. The technician should disconnect the EGR system module tube from the exhaust manifold followed by removing six left-hand exhaust manifold nuts and the attached gasket and nuts. Begin by cleanup of the left-hand exhaust manifold and an inspection. Then proceed to remove the six left-hand exhaust manifold studs that need disposal. Six new left-hand exhaust manifold studs need installation first before torquing them to 12 Nm (9 lb-ft). Install the new left-hand exhaust manifold gasket and manifold by using six new nuts that should be tightened to 23 Nm (17 lb-ft). Connect the EGR system module tube to the exhaust manifold while tightening it to 39 Nm (29 lb-ft). Continue by installing two brand new catalytic converter-to-exhaust manifold nuts which need to be tightened to 45 Nm (33 lb-ft).