FordParts
My Garage
My Account
Cart
OEM 2009 Ford Mustang EGR Tube
EGR Hose- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 EGR Tubes found
2009 Ford Mustang Connector Pipe Part Number: 5R3Z-9E470-DA
Product Specifications- Other Name: Tube - Connecting; Exhaust Gas Recirculation (EGR) Tube
- Base No.: 9E470
- Item Weight: 0.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5R3Z-9E470-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Mustang Tube Assembly Part Number: 5R3Z-9E469-GA
Product Specifications- Other Name: Tube - EGR Valve To Exhaust Manifold; Exhaust Gas Recirculation (EGR) Tube; EGR Tube; Tube
- Replaces: 5R3Z-9E469-FA
- Base No.: 9E469
- Item Weight: 1.30 Pounds
- Item Dimensions: 5.0 x 11.2 x 36.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5R3Z-9E469-GA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Mustang EGR Tube
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Mustang EGR Tube available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Mustang EGR Tube as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Ford Mustang EGR Tube Parts Q&A
- Q: How to service the EGR Tube equipped with a 5.4L 4V engine on 2009 Ford Mustang?A: The removal of battery tray represents the initial step to service the Exhaust Gas Recirculation (EGR) system module tube in 5.4L 4V engine vehicles. When repairing the EGR system module tube disconnect it from the EGR system module fitting before tightening the connection to 40 Nm (30 lb-ft). You must disconnect the EGR system module tube from its fitting at the exhaust manifold before removing it from its position. The installation process requires following the opposite order of removal steps by tightening all fittings to 40 Nm (30 lb-ft).