OEM 2009 Ford Mustang Windshield

2009 Ford Mustang Windshield Parts Questions & Experts Answers

• Q: How to remove and install a windshield glass on 2009 Ford Mustang?

  A: The first step for windshield glass removal requires cowl vent screen removal and interior rear view mirror removal. Coupes need the removal of A-pillar trim panels and overhead console together with sun visor on the left and right sides followed by lowering the front headliner with necessary support. Convertibles require uninstallation of the header trim panel together with both left-hand and right-hand A-pillar trim panels. Before cutting the urethane adhesive clean the pinch weld area on the windshield with a shop towel combined with compressed air which should be free of oil. Water lubrication applied to the adhesive will help operate the Deluxe Windshield Removal Tool although protective eye gear and gloves should be worn at all times during this process. Use the tool by inserting it into the upper windshield middle section and perform a corner-to-corner cut while using The Pumper to maintain separation between windshield and body. Secure the windshield onto a flat and secure location. The new windshield should be placed on to the existing urethane bead while maintaining center alignment before marking the installation points. Treat damaged areas of the pinch weld by eliminating rust while avoiding surface scratches and conduct complete area cleanup. To utilize an existing windshield it is necessary to remove the old adhesive until only a thin layer remains to bond the window. Before applying a new windshield clean its interior surface then add glass primer which needs to dry for at least 6 minutes. The urethane adhesive applicator should undergo dimensional trimming before being used to make an uninterrupted bead that covers the complete area. The windshield installation should begin within 10 minutes from application and vehicle windows should be opened for air pressure control. Check for leaks after the minimum curing time of one hour and only then use additional adhesive if needed. Proceed with the reinstallation of the interior rear view mirror and cowl vent screen while adjusting wiper blade and pivot arms according to necessary specifications.