How to Service and Repair the A/C Hose on 2009 Ford Ranger?

Objective 1 requires refrigerant recovery as the first step when servicing the HVAC hose/line. The service starts by disconnecting the clutch field coil electrical connector while using a socket wrench to loosen and uninstall the A/C compressor manifold bolt to remove the compressor manifold and tube assembly. Discard the O-ring seals with this step. The manifold bolt installation requires torque to 20 Nm (177 lb-in). You should disconnect the suction fitting of the compressor and then discard the seals for the O-rings. The process requires removal of the compressor-to-condenser line fitting nut followed by disconnecting the fitting while throwing away the O-ring seal which needs to be tightened to 8 Nm (71 lb-in) upon installation. Start by removing the compressor manifold with its tubes and possibly disconnect sovereign the suction accumulator outlet fitting while disposing of O-ring seals. Proceed with suction accumulator-to-compressor line removal in case it is required. The installation process requires a reversal of the disassembly steps followed by seal installation and the correct PAG oil addition for lubricating the refrigerant system. The last procedure brings together the evacuation process and leakage testing and system charging.

OEM 2009 Ford Ranger A/C Hose

Air Conditioning Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 A/C Hoses found

View related parts
2009 Ford Ranger A/C Line
Part Number: 6L5Z-19835-AA
$37.79 MSRP: $60.00
You Save: $22.21 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Liquid Hose; A/C Hose; Liquid Line
- Manufacturer Note: Condenser To Evaporator
- Replaces: 1L5Z-19835-AB
- Base No.: 19835
- Item Weight: 1.30 Pounds
- Item Dimensions: 24.9 x 4.2 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L5Z-19835-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2009 Ford Ranger A/C Tube
Part Number: 7L5Z-19972-A
$75.81 MSRP: $127.27
You Save: $51.46 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Discharge Hose; A/C Hose
- Manufacturer Note: Compressor to condenser
- Replaces: 1L5Z-19835-AA, 6L5Z-19972-AA
- Base No.: 19835
- Item Weight: 1.00 Pounds
- Item Dimensions: 7.4 x 15.3 x 29.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L5Z-19972-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Ranger Submodels:
- Sport, STX, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
2009 Ford Ranger Discharge Line
Part Number: AL5Z-19D850-D
$144.27 MSRP: $237.38
You Save: $93.11 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold And Tube Assembly - Air Conditioning; A/C Refrigerant Hose; A/C Refrigerant Liquid Hose; A/C Hose; Suction & Discharge Hose Assembly; Hose & Tube Assembly; Manifold And Tube Asy - Air Cond
- Manufacturer Note: Manifold And Tube Assy
- Replaces: 6L5Z-19D850-CA, 8L5Z-19D850-A
- Base No.: 19D850
- Item Weight: 4.00 Pounds
- Item Dimensions: 16.0 x 17.0 x 26.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AL5Z-19D850-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, Tremor, XL, XLT | 6 Cyl 4.0 L GAS
View related parts
2009 Ford Ranger Discharge Line
Part Number: AL5Z-19D850-A
$107.75 MSRP: $177.29
You Save: $69.54 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube - Compressor To Manifold; A/C Refrigerant Discharge Hose; A/C Refrigerant Liquid Hose; A/C Hose; Hose & Tube Assembly
- Manufacturer Note: Manifold And Tube Assy
- Replaces: 1L5Z-19D850-AA, 6L5Z-19D850-AA
- Base No.: 19D850
- Item Weight: 1.00 Pounds
- Item Dimensions: 6.8 x 8.9 x 13.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AL5Z-19D850-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Ranger Submodels:
- Sport, STX, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
2009 Ford Ranger Suction Line
Part Number: AL5Z-19867-A
$77.35 MSRP: $127.27
You Save: $49.92 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Suction Hose; A/C Refrigerant Liquid Hose; A/C Hose
- Manufacturer Note: Air Conditioning Evaporator To Compressor
- Replaces: 6L5Z-19867-AA, 1L5Z-19867-AA, YF-3344, 6L5Z-19867-AB
- Base No.: 19867
- Item Weight: 1.40 Pounds
- Item Dimensions: 1.6 x 20.0 x 19.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AL5Z-19867-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Ranger Submodels:
- Sport, STX, XL, XLT | 4 Cyl 2.3 L GAS

2009 Ford Ranger A/C Hose

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Ranger A/C Hose available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Ranger A/C Hose as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Ranger A/C Hose Parts Questions & Experts Answers

Q: How to Service and Repair the A/C Hose on 2009 Ford Ranger?
A: Objective 1 requires refrigerant recovery as the first step when servicing the HVAC hose/line. The service starts by disconnecting the clutch field coil electrical connector while using a socket wrench to loosen and uninstall the A/C compressor manifold bolt to remove the compressor manifold and tube assembly. Discard the O-ring seals with this step. The manifold bolt installation requires torque to 20 Nm (177 lb-in). You should disconnect the suction fitting of the compressor and then discard the seals for the O-rings. The process requires removal of the compressor-to-condenser line fitting nut followed by disconnecting the fitting while throwing away the O-ring seal which needs to be tightened to 8 Nm (71 lb-in) upon installation. Start by removing the compressor manifold with its tubes and possibly disconnect sovereign the suction accumulator outlet fitting while disposing of O-ring seals. Proceed with suction accumulator-to-compressor line removal in case it is required. The installation process requires a reversal of the disassembly steps followed by seal installation and the correct PAG oil addition for lubricating the refrigerant system. The last procedure brings together the evacuation process and leakage testing and system charging.