How to Service and Repair the A/C Hose in the Compressor Manifold and Tube Assembly on 2008 Ford Ranger?

A proper repair and maintenance service for the compressor manifold and tube assembly should start with refrigerant recovery. Remove the suction accumulator outlet fitting by disconnecting it before discarding its O-ring seals. Detach the condenser inlet fitting by unscrewing the nut then disconnect it followed by trashing its original O-ring seal while replacement requires a torque setting of 8 Nm (71 lb-in). Remove the electrical connector of the pressure cutoff switch and disconnect the fuel line spring lock coupling. Fasten the bracket tightly to 12 Nm (9 lb-ft) while reinstalling it in position. Preremove the compressor manifold and tube assembly bracket nut and follow installation protocol by securing it at 12 Nm (9 lb-ft). The procedure calls for loose removal of the A/C compressor manifold bolt while you discard the existing O-ring seals before tightening it to 20 Nm (15 lb-ft). Start with removal procedure reversal while adding new O-ring seals and lubricating the system with the proper quantity of clean PAG oil. The refrigerant system must be evacuated because leakage testing follows which requires system charging.

OEM 2008 Ford Ranger A/C Hose

Air Conditioning Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 A/C Hoses found

View related parts
2008 Ford Ranger A/C Line
Part Number: 6L5Z-19835-AA
$37.79 MSRP: $60.00
You Save: $22.21 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Liquid Hose; A/C Hose; Liquid Line
- Manufacturer Note: Condenser To Evaporator
- Replaces: 1L5Z-19835-AB
- Base No.: 19835
- Item Weight: 1.30 Pounds
- Item Dimensions: 24.9 x 4.2 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L5Z-19835-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Ford Ranger A/C Tube
Part Number: 7L5Z-19972-A
$75.81 MSRP: $127.27
You Save: $51.46 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Discharge Hose; A/C Hose
- Manufacturer Note: Compressor to condenser
- Replaces: 1L5Z-19835-AA, 6L5Z-19972-AA
- Base No.: 19835
- Item Weight: 1.00 Pounds
- Item Dimensions: 7.4 x 15.3 x 29.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L5Z-19972-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Ranger Submodels:
- Sport, STX, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
2008 Ford Ranger Discharge Line
Part Number: AL5Z-19D850-D
$144.27 MSRP: $237.38
You Save: $93.11 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold And Tube Assembly - Air Conditioning; A/C Refrigerant Hose; A/C Refrigerant Liquid Hose; A/C Hose; Suction & Discharge Hose Assembly; Hose & Tube Assembly; Manifold And Tube Asy - Air Cond
- Manufacturer Note: Manifold And Tube Assy
- Replaces: 6L5Z-19D850-CA, 8L5Z-19D850-A
- Base No.: 19D850
- Item Weight: 4.00 Pounds
- Item Dimensions: 16.0 x 17.0 x 26.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AL5Z-19D850-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, Tremor, XL, XLT | 6 Cyl 4.0 L GAS
View related parts
2008 Ford Ranger Discharge Line
Part Number: AL5Z-19D850-A
$107.75 MSRP: $177.29
You Save: $69.54 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube - Compressor To Manifold; A/C Refrigerant Discharge Hose; A/C Refrigerant Liquid Hose; A/C Hose; Hose & Tube Assembly
- Manufacturer Note: Manifold And Tube Assy
- Replaces: 1L5Z-19D850-AA, 6L5Z-19D850-AA
- Base No.: 19D850
- Item Weight: 1.00 Pounds
- Item Dimensions: 6.8 x 8.9 x 13.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AL5Z-19D850-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Ranger Submodels:
- Sport, STX, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
2008 Ford Ranger Suction Line
Part Number: AL5Z-19867-A
$77.35 MSRP: $127.27
You Save: $49.92 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assembly; A/C Refrigerant Suction Hose; A/C Refrigerant Liquid Hose; A/C Hose
- Manufacturer Note: Air Conditioning Evaporator To Compressor
- Replaces: 6L5Z-19867-AA, 1L5Z-19867-AA, YF-3344, 6L5Z-19867-AB
- Base No.: 19867
- Item Weight: 1.40 Pounds
- Item Dimensions: 1.6 x 20.0 x 19.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AL5Z-19867-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Ranger Submodels:
- Sport, STX, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
2008 Ford Ranger Suction & Discharge Hose Assembly
Part Number: 6L5Z-19D850-BA
$87.07 MSRP: $143.27
You Save: $56.20 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube - Compressor To Manifold; A/C Refrigerant Liquid Hose; A/C Hose; Hose & Tube Assembly
- Manufacturer Note: Manifold And Tube Assy
- Replaces: XL5Z-19D850-BA
- Base No.: 19D850
- Item Weight: 3.80 Pounds
- Item Dimensions: 11.6 x 8.0 x 37.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L5Z-19D850-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Ranger Submodels:
- Edge, Sport, STX, Tremor, XL, XLT | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

2008 Ford Ranger A/C Hose

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Ranger A/C Hose available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Ranger A/C Hose as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford Ranger A/C Hose Parts Questions & Experts Answers

Q: How to Service and Repair the A/C Hose in the Compressor Manifold and Tube Assembly on 2008 Ford Ranger?
A: A proper repair and maintenance service for the compressor manifold and tube assembly should start with refrigerant recovery. Remove the suction accumulator outlet fitting by disconnecting it before discarding its O-ring seals. Detach the condenser inlet fitting by unscrewing the nut then disconnect it followed by trashing its original O-ring seal while replacement requires a torque setting of 8 Nm (71 lb-in). Remove the electrical connector of the pressure cutoff switch and disconnect the fuel line spring lock coupling. Fasten the bracket tightly to 12 Nm (9 lb-ft) while reinstalling it in position. Preremove the compressor manifold and tube assembly bracket nut and follow installation protocol by securing it at 12 Nm (9 lb-ft). The procedure calls for loose removal of the A/C compressor manifold bolt while you discard the existing O-ring seals before tightening it to 20 Nm (15 lb-ft). Start with removal procedure reversal while adding new O-ring seals and lubricating the system with the proper quantity of clean PAG oil. The refrigerant system must be evacuated because leakage testing follows which requires system charging.