How to remove and replace the wheel cylinder while ensuring proper brake fluid usage and system functionality on 2009 Ford Ranger?

The procedure begins by using fresh brake fluid meeting production standards which has to be free from drained fluid to secure system protection against contamination and infrastructural damage. Review warning messages provided on the product label before considering professional medical consultation in case emergencies occur. A quick water cleanup of brake fluid spills on painted or plastic surfaces will prevent surface deterioration. Brake shoes along with linings need to be removed first. Detach the brake tube-to-wheel cylinder fitting before reinstallation where you should tighten it to 18 Nm (159 lb-in). During replacement of the wheel cylinder remove its two bolts then install the cylinder while tightening the bolts to 15 Nm (133 lb-in). The conclusion of the process involves performing the brake system bleeding procedure to verify correct operation.

OEM 2009 Ford Ranger Wheel Cylinder

Brake Wheel Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Wheel Cylinders found

View related parts
2009 Ford Ranger Caliper, Front
Part Number: 6L5Z-2B120-A
Product Specifications
- Other Name: Caliper Assembly - Brake - Less Pad; Disc Brake Caliper, Front Left, Front Right; Brake Caliper Repair Kit; Caliper Assembly - Brake - Less Pads; Brake Caliper
- Position: Front
- Replaces: 1L2Z-2B120-AB, 3L2Z-2B120-BB
- Base No.: 2B120
- Item Weight: 9.30 Pounds
- Item Dimensions: 5.6 x 7.5 x 10.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L5Z-2B120-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2009 Ford Ranger Wheel Cylinder, Rear
Part Number: 3L5Z-2262-DB
Product Specifications
- Other Name: Cylinder Assembly - Rear Brake
- Position: Rear
- Replaces: 2L5Z-2262-DB, 3L5Z-2262-DA, 2L5Z-2262-DA
- Base No.: 2262
- Item Weight: 1.40 Pounds
- Item Dimensions: 2.9 x 2.0 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 3L5Z-2262-DB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2009 Ford Ranger Wheel Cylinder, Rear
Part Number: 2L5Z-2262-CB
Product Specifications
- Other Name: Cylinder Assembly - Rear Brake
- Manufacturer Note: Warranty Eligible
- Position: Rear
- Replaces: 2L5Z-2262-CA
- Base No.: 2262
- Item Weight: 1.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 2L5Z-2262-CB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS

2009 Ford Ranger Wheel Cylinder

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Ranger Wheel Cylinder available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Ranger Wheel Cylinder as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Ranger Wheel Cylinder Parts Questions & Experts Answers

Q: How to remove and replace the wheel cylinder while ensuring proper brake fluid usage and system functionality on 2009 Ford Ranger?
A: The procedure begins by using fresh brake fluid meeting production standards which has to be free from drained fluid to secure system protection against contamination and infrastructural damage. Review warning messages provided on the product label before considering professional medical consultation in case emergencies occur. A quick water cleanup of brake fluid spills on painted or plastic surfaces will prevent surface deterioration. Brake shoes along with linings need to be removed first. Detach the brake tube-to-wheel cylinder fitting before reinstallation where you should tighten it to 18 Nm (159 lb-in). During replacement of the wheel cylinder remove its two bolts then install the cylinder while tightening the bolts to 15 Nm (133 lb-in). The conclusion of the process involves performing the brake system bleeding procedure to verify correct operation.