FordParts
My Garage
My Account
Cart
OEM 2009 Ford Ranger Slip Yoke
Transmission Slip Yoke- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Slip Yokes found
2009 Ford Ranger Slip Yoke Part Number: F6ZZ-4841-BA
$199.00 MSRP: $289.67You Save: $90.67 (32%)Product Specifications- Other Name: Flange - Coupling; Double Cardan CV Centering Yoke; Driveshaft Yokes
- Base No.: 4841
- Item Weight: 8.60 Pounds
- Item Dimensions: 9.4 x 8.5 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F6ZZ-4841-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Ranger Slip Yoke Part Number: F57Z-4841-DB
$159.96 MSRP: $232.83You Save: $72.87 (32%)Product Specifications- Other Name: Flange - Coupling; Double Cardan CV Centering Yoke; Driveshaft Yokes
- Manufacturer Note: Slip yoke
- Replaces: F57Z-4841-DA
- Base No.: 4841
- Item Weight: 5.80 Pounds
- Item Dimensions: 7.8 x 6.0 x 10.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F57Z-4841-DB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Ranger Slip Yoke Part Number: F57Z-4841-BA
Product Specifications- Other Name: Flange - Coupling; Double Cardan CV Centering Yoke; Driveshaft Yokes
- Manufacturer Note: Slip yoke
- Base No.: 4841
- Item Weight: 3.10 Pounds
- Item Dimensions: 9.1 x 9.5 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F57Z-4841-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Ranger Slip Yoke Part Number: 6L5Z-4841-B
Product Specifications- Other Name: Flange - Coupling; Double Cardan CV Centering Yoke; Driveshaft Yokes
- Replaces: 4L5Z-4841-AA
- Base No.: 4841
- Item Weight: 4.60 Pounds
- Item Dimensions: 9.5 x 9.2 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L5Z-4841-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Ranger Slip Yoke
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Ranger Slip Yoke available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Ranger Slip Yoke as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Ford Ranger Slip Yoke Parts Q&A
- Q: How to service and repair the driveshaft slip yoke on 2009 Ford Ranger?A: Start by setting the driveshaft on a proper workbench with no vise clamp that could potentially harm the components during repairs of the slip yoke. The first step involves properly indexing the driveshaft alongside the slip yoke before clipping and throwing away the slip-yoke boot clamps to extract the slip yoke from the driveshaft. Check the slip-yoke boot for damage then throw it away if needed. Examine lubricant located on the driveshaft splines together with inside the slip-yoke for signs of contamination then check components for wear before replacing them if needed. When assembling the driveshaft fit only a new small driveshaft slip-yoke boot clamp onto the stub shaft before placing the smaller end of the slip-yoke boot on the stub shaft. The Keystone Clamp Installer helps in crimping the boot clamp while you install the slip-yoke onto the driveshaft. Fit 10 g (0.24 oz) of grease into the slip-yoke boot and apply it to the splines while pulling the boot toward the driveshaft. Use new position large slip-yoke boot clamp while matching index marks and place slip-yoke into position. The driveshaft assembled length specification must be set through stub shaft weld measurement to slip-yoke end point along with boot groove placement verification. All surfaces should be free from extra grease. To finish the operation bleed air from the boot then use the Keystone Clamp Installer to secure the large boot clamp.