How to Service and Repair the Sway Bar Link on 2009 Ford Ranger?

The procedure to repair or service the sway bar link must begin with a vehicle setup that consists of NEUTRAL gear position and placement on a hoist. Before tightening new sway bar link nuts to 35 Nm (26 lb-ft), eliminate and discard front sway bar link nuts and grommets. The service begins with removing front sway bar link studs together with front sway bar links and continuing to remove four sway bar bracket bolts and sway bar, brackets, and bushings before discarding the sway bar bracket bolts. During installation, secure the new bolts with a torque value of 40 Nm (30 lb-ft). Examine and clean both mating elements and internal threads until you confirm the elimination of all foreign substances as well as thread locking compound residues. The installation of sway bar bracket bolts in the frame may be impossible, but you should remove weld nuts and use flag nuts (N807634-S441) instead. The installation process concludes by doing the opposite of the removal steps with strict compliance to torque specifications for maintaining correct component retention.

OEM 2009 Ford Ranger Sway Bar Link

Stabilizer Sway Bar Link

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Sway Bar Links found

View related parts
2009 Ford Ranger Stabilizer Link, Front
Part Number: 2L2Z-5K483-AA
$27.25 MSRP: $43.27
You Save: $16.02 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link, Front; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link
- Manufacturer Note: Warranty Eligible
- Position: Front
- Base No.: 5K483
- Item Weight: 0.40 Pounds
- Item Dimensions: 8.3 x 7.7 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 2L2Z-5K483-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Ranger Submodels:
- Edge, FX4, Splash, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2009 Ford Ranger Stabilizer Link, Rear
Part Number: F77Z-5K484-HA
$41.59 MSRP: $67.09
You Save: $25.50 (39%)
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link, Rear; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Manufacturer Note: 276mm between center of bolt holes, 4x4 or 4X2 with extra havy duty suspension, FROM 3/1/97
- Position: Rear
- Replaces: F37Z-5K484-B
- Base No.: 5K484
- Item Weight: 1.00 Pounds
- Item Dimensions: 1.6 x 2.4 x 12.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: F77Z-5K484-HA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Ranger Submodels:
- Edge, FX4, Splash, Sport, STX, Tremor, XL, XL Sport, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2009 Ford Ranger Stabilizer Link, Rear
Part Number: F77Z-5K484-GA
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link, Rear; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Manufacturer Note: 200mm between center of bolt holes, 4x2, FROM 3/1/97
- Position: Rear
- Replaces: F37Z-5K484-A
- Base No.: 5K484
- Item Weight: 0.30 Pounds
- Item Dimensions: 1.5 x 2.4 x 9.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: F77Z-5K484-GA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Ranger Submodels:
- Edge, FX4, Splash, Sport, STX, Tremor, XL, XL Sport, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS

2009 Ford Ranger Sway Bar Link

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Ranger Sway Bar Link available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Ranger Sway Bar Link as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Ranger Sway Bar Link Parts Questions & Experts Answers

Q: How to Service and Repair the Sway Bar Link on 2009 Ford Ranger?
A: The procedure to repair or service the sway bar link must begin with a vehicle setup that consists of NEUTRAL gear position and placement on a hoist. Before tightening new sway bar link nuts to 35 Nm (26 lb-ft), eliminate and discard front sway bar link nuts and grommets. The service begins with removing front sway bar link studs together with front sway bar links and continuing to remove four sway bar bracket bolts and sway bar, brackets, and bushings before discarding the sway bar bracket bolts. During installation, secure the new bolts with a torque value of 40 Nm (30 lb-ft). Examine and clean both mating elements and internal threads until you confirm the elimination of all foreign substances as well as thread locking compound residues. The installation of sway bar bracket bolts in the frame may be impossible, but you should remove weld nuts and use flag nuts (N807634-S441) instead. The installation process concludes by doing the opposite of the removal steps with strict compliance to torque specifications for maintaining correct component retention.