How to service the Sway Bar Link on 2008 Ford Ranger?

Service of a sway bar link requires the vehicle to be in NEUTRAL position on a hoist setup. You should remove front sway bar link nuts and grommets before installing new ones which you should tighten to 35 Nm (26 lb-ft). The next step involves removing both front sway bar link studs and links. Disassemble the sway bar bracket bolts with four components including sway bar and brackets and bushings and throw away the sway bar bracket bolts. Administer torque value of 40 Nm (30 lb-ft) during new bolt installation. Surface detection of mating components and internal threads should include foreign debris removal as well as thread locking compound removal. The frame still allows sway bar bracket bolt installation but if it does not then remove the weld nut while adding a flag nut (N807634-S441). To finish the installation follow the reverse order of the removal process.

OEM 2008 Ford Ranger Sway Bar Link

Stabilizer Sway Bar Link

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Sway Bar Links found

View related parts
2008 Ford Ranger Stabilizer Link, Front
Part Number: 2L2Z-5K483-AA
$27.25 MSRP: $43.27
You Save: $16.02 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link, Front; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link
- Manufacturer Note: Warranty Eligible
- Position: Front
- Base No.: 5K483
- Item Weight: 0.40 Pounds
- Item Dimensions: 8.3 x 7.7 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 2L2Z-5K483-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Ranger Submodels:
- Edge, FX4, Splash, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Ford Ranger Stabilizer Link, Rear
Part Number: F77Z-5K484-HA
$41.59 MSRP: $67.09
You Save: $25.50 (39%)
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link, Rear; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Manufacturer Note: 276mm between center of bolt holes, 4x4 or 4X2 with extra havy duty suspension, FROM 3/1/97
- Position: Rear
- Replaces: F37Z-5K484-B
- Base No.: 5K484
- Item Weight: 1.00 Pounds
- Item Dimensions: 1.6 x 2.4 x 12.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: F77Z-5K484-HA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Ranger Submodels:
- Edge, FX4, Splash, Sport, STX, Tremor, XL, XL Sport, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Ford Ranger Stabilizer Link, Rear
Part Number: F77Z-5K484-GA
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link, Rear; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Manufacturer Note: 200mm between center of bolt holes, 4x2, FROM 3/1/97
- Position: Rear
- Replaces: F37Z-5K484-A
- Base No.: 5K484
- Item Weight: 0.30 Pounds
- Item Dimensions: 1.5 x 2.4 x 9.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: F77Z-5K484-GA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Ranger Submodels:
- Edge, FX4, Splash, Sport, STX, Tremor, XL, XL Sport, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS

2008 Ford Ranger Sway Bar Link

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Ranger Sway Bar Link available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Ranger Sway Bar Link as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford Ranger Sway Bar Link Parts Questions & Experts Answers

Q: How to service the Sway Bar Link on 2008 Ford Ranger?
A: Service of a sway bar link requires the vehicle to be in NEUTRAL position on a hoist setup. You should remove front sway bar link nuts and grommets before installing new ones which you should tighten to 35 Nm (26 lb-ft). The next step involves removing both front sway bar link studs and links. Disassemble the sway bar bracket bolts with four components including sway bar and brackets and bushings and throw away the sway bar bracket bolts. Administer torque value of 40 Nm (30 lb-ft) during new bolt installation. Surface detection of mating components and internal threads should include foreign debris removal as well as thread locking compound removal. The frame still allows sway bar bracket bolt installation but if it does not then remove the weld nut while adding a flag nut (N807634-S441). To finish the installation follow the reverse order of the removal process.