How to remove and replace the wheel cylinder on 2008 Ford Ranger?

The replacement of wheel cylinders requires clean brake fluid according to manufacturer standards and the exclusion of used fluid materials to defend against system contamination. Reading all safety warnings on the product label and accessing Ford/Motorcraft product emergency medical help through calls to 1-800-959-3673 within the USA or Canada. You must wash off brake fluid spills which contact painted or plastic components as soon as possible with water. The procedure commences by extracting brake shoes together with linings before breaking the brake tube-to-wheel cylinder connection which needs a torque setting of 18 Nm (13 lb-ft) during replacement. The two wheel cylinder bolts have to be removed while you also take out the wheel cylinder before reinstalling the bolts to 15 Nm (11 lb-ft) torque. To finish the brake installation you should reverse the removal steps then perform a bleeding procedure on the system.

OEM 2008 Ford Ranger Wheel Cylinder

Brake Wheel Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Wheel Cylinders found

View related parts
2008 Ford Ranger Caliper, Front
Part Number: 6L5Z-2B120-A
Product Specifications
- Other Name: Caliper Assembly - Brake - Less Pad; Disc Brake Caliper, Front Left, Front Right; Brake Caliper Repair Kit; Caliper Assembly - Brake - Less Pads; Brake Caliper
- Position: Front
- Replaces: 1L2Z-2B120-AB, 3L2Z-2B120-BB
- Base No.: 2B120
- Item Weight: 9.30 Pounds
- Item Dimensions: 5.6 x 7.5 x 10.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L5Z-2B120-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Ford Ranger Wheel Cylinder, Rear
Part Number: 3L5Z-2262-DB
Product Specifications
- Other Name: Cylinder Assembly - Rear Brake
- Position: Rear
- Replaces: 2L5Z-2262-DB, 3L5Z-2262-DA, 2L5Z-2262-DA
- Base No.: 2262
- Item Weight: 1.40 Pounds
- Item Dimensions: 2.9 x 2.0 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 3L5Z-2262-DB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Ford Ranger Wheel Cylinder, Rear
Part Number: 2L5Z-2262-CB
Product Specifications
- Other Name: Cylinder Assembly - Rear Brake
- Manufacturer Note: Warranty Eligible
- Position: Rear
- Replaces: 2L5Z-2262-CA
- Base No.: 2262
- Item Weight: 1.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 2L5Z-2262-CB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS

2008 Ford Ranger Wheel Cylinder

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Ranger Wheel Cylinder available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Ranger Wheel Cylinder as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford Ranger Wheel Cylinder Parts Questions & Experts Answers

Q: How to remove and replace the wheel cylinder on 2008 Ford Ranger?
A: The replacement of wheel cylinders requires clean brake fluid according to manufacturer standards and the exclusion of used fluid materials to defend against system contamination. Reading all safety warnings on the product label and accessing Ford/Motorcraft product emergency medical help through calls to 1-800-959-3673 within the USA or Canada. You must wash off brake fluid spills which contact painted or plastic components as soon as possible with water. The procedure commences by extracting brake shoes together with linings before breaking the brake tube-to-wheel cylinder connection which needs a torque setting of 18 Nm (13 lb-ft) during replacement. The two wheel cylinder bolts have to be removed while you also take out the wheel cylinder before reinstalling the bolts to 15 Nm (11 lb-ft) torque. To finish the brake installation you should reverse the removal steps then perform a bleeding procedure on the system.