FordParts
My Garage
My Account
Cart
OEM 2009 Lincoln MKZ Oxygen Sensors
Oxygen O2 Sensor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Oxygen Sensors found
2009 Lincoln MKZ Oxygen Sensor, Rear Driver Side Part Number: 5F9Z-9G444-AB
$64.75 MSRP: $106.55You Save: $41.80 (40%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Sensor - Exhaust Gas - Oxygen; Oxygen Sensor, Rear, Rear Left; Rear Oxygen Sensor; Lower Oxygen Sensor
- Position: Rear Driver Side
- Replaces: 5F9Z-9G444-AA
- Base No.: 9G444
- Item Weight: 0.80 Pounds
- Item Dimensions: 8.5 x 7.7 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5F9Z-9G444-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Lincoln MKZ Oxygen Sensor, Front Part Number: 7T4Z-9F472-A
$62.43 MSRP: $102.73You Save: $40.30 (40%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Sensor - Hego; Oxygen Sensor, Front; Front Oxygen Sensor; Upper Oxygen Sensor
- Position: Front
- Base No.: 9F472
- Item Weight: 0.40 Pounds
- Item Dimensions: 8.7 x 8.0 x 7.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 7T4Z-9F472-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Lincoln MKZ Oxygen Sensors
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Lincoln MKZ Oxygen Sensors available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Lincoln MKZ Oxygen Sensors as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Lincoln MKZ Oxygen Sensors Parts Q&A
- Q: How to Service Oxygen Sensors on 2009 Lincoln MKZ?A: The service of Heated Oxygen Sensor (HO2S) begins with removing the PCV hose. Next, disconnect the HO2S electrical connector. The application of penetrating and lock lubricant on sensor threads will help with removal if necessary. The service of this component requires the Exhaust Gas Oxygen Sensor Socket to extract the HO2S while computing the exact torque wrench setting according to specifications. The installation of the new sensor requires anti-seize lubricant coating applied lightly around the threads before tightening it to 48 Nm (35 lb-ft). End the installation process by performing the reverse sequence of removal steps.