Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2009 Lincoln Navigator Submodels:
Base, L, L Luxury, L Ultimate, Luxury, Ultimate | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
2009 Lincoln Navigator Wheel Bearing
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Lincoln Navigator Wheel Bearing available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Lincoln Navigator Wheel Bearing as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Lincoln Navigator Wheel Bearing Parts Q&A
Q: How to service the wheel bearing and wheel hub in the front suspension on 2009 Lincoln Navigator?
A: The process of servicing the wheel bearing and wheel hub in the front suspension demands detachment of the wheel speed sensor electrical connector followed by wheel and tire removal. Closely disconnect the wheel speed sensor harness from its retainers before detaching it and tighten the harness to 12 Nm (106 lb-in) when re-assembling the components. The brake hose operation demands proper maintenance by removing the two bolts so the caliper and anchor plate assembly can be supported with mechanic's wire before securing it at 200 Nm (148 lb-ft) torque. Following this operation discard the brake disc as well as all four wheel bearing and wheel hub bolts before reinstalling your new hardware while tightening them to 175 Nm (129 lb-ft). To install new wheel bearing and wheel hub components you should detach the wheel speed sensor bolt and sensor while reinstalling them with a torque size of 18 Nm (159 lb-in). When reinstalling the wheel bearing and hub without replacement the original components must receive a new O-ring seal to avert harm to the wheel bearing. Proceed with the installation by performing the opposite steps used for removal.