How to Remove and Replace the Flywheel on 2009 Lincoln Town Car?

To change flexplate make sure the vehicle is in neutral position and on a hoist. Either pull away the transmission and the 6 bolts holding the flexplate. Install flexplate, loosely engage the bolts and tighten them to 80 Nm (59 lb-ft) in that particular order and later re-install the transmission.

OEM 2009 Lincoln Town Car Flywheel

Clutch Flywheel

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Flywheel found

View related parts
2009 Lincoln Town Car Drive Plate Part Number: 4W7Z-6375-AA
$56.91 MSRP: $82.83
You Save: $25.92 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Flywheel Assembly; Automatic Transmission Flexplate; Flywheel
- Replaces: F6AZ-6375-BA, F3LY-6375-A
- Base No.: 6375
- Item Weight: 9.90 Pounds
- Item Dimensions: 18.9 x 3.1 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4W7Z-6375-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Lincoln Town Car Submodels:
- Anniversary, Base, Cartier, Cartier L, Designer Series, Executive, Executive L, Executive Protection Series, Protection Series, Signature, Signature L, Signature Limited, Touring Edition, Ultimate, Ultimate L | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS

2009 Lincoln Town Car Flywheel

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Lincoln Town Car Flywheel available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Lincoln Town Car Flywheel as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Lincoln Town Car Flywheel Parts Q&A

Q: How to Remove and Replace the Flywheel on 2009 Lincoln Town Car?
A: To change flexplate make sure the vehicle is in neutral position and on a hoist. Either pull away the transmission and the 6 bolts holding the flexplate. Install flexplate, loosely engage the bolts and tighten them to 80 Nm (59 lb-ft) in that particular order and later re-install the transmission.