OEM 2009 Lincoln Town Car Transmission Pan

2009 Lincoln Town Car Transmission Pan Parts Questions & Experts Answers

• Q: How to Service and Repair the Transmission Pan on the 4R70E/4R75E on 2009 Lincoln Town Car?

  A: The first step to inspect and repair the fluid pan of a 4R70E/4R75E transmission is to place the vehicle into NEUTRAL position and set it on a hoist. Let transmission fluid drain out by loosening pan bolts after removing the bolts and removing the fluid pan together with its gasket. Draw the filter and seal carefully from the transmission fluid filter. To start the fluid pan service check for any damage on the fluid pan gasket and magnet as well as the fluid pan itself. It is essential to remove the main control bore seal residue from the transmission filter installation using a small screwdriver with careful attention to avoid bore damage. During transmission filter replacement service the replacement mold ring must be installed whenever contamination exists. Otherwise the filter may be reused without replacement as long as contamination remains at an acceptable level. Place the new filter and necessary seal onto their spots before returning the magnet to the fluid pan. A new gasket needs installation when it sustains damage yet otherwise the gasket is usable. Place the fluid pan along with its gasket before tightening the pan bolts to 14 Nm (124 lb-in). To complete the procedure add 4.7L (5 qt) of approved transmission fluid until reaching the proper fluid height mark.